Handling (stacking) robot protective clothing
Product advantages：
Dust prevent,Stain prevent,Anticorrosion,Water repellent;
Application industry:
Handling opera,Warehousing,Chemical industry,Automobile,Food processing,Spare parts,Iron and steel
Design advantage:
Digital remote design,No field measurement required,Short supply cycle,High precision design,Only 2D & 3D digital analog, on-site video and pipeline trend are required.;
Product Introduction:
It is made of high-quality materials that are dust-proof, corrosion-resistant, wear-resistant, tear resistant and water splashing resistant, so as to avoid the materials transported contacting with the robot or even entering the robot motor. It is mainly used in the fields of chemical industry, grain, lime and other production and processing to implement the repetitive actions of stacking and handling robots.
Material parameters:
High strength film covering material
It has excellent mechanical properties. The tearing strength and breaking strength of the material are far greater than the general functional fabric. It has high strength and tear resistance. It is very suitable for robots with high frequency and repetitive actions. It has good anti twist and bending performance, which can meet the repetitive work of robot in high frequency without damage.
Flame retardant Velcro
The flame retardant properties of buckle and burr are up to Class B1, with good tear resistance.
Flame retardant elastic belt
It has good flame retardancy, high strength, elongation ratio over 1:2.5, and is not easy to produce fatigue under the long-term action of external force.
Flame retardant sewing thread
The suture is made of Kevlar 1414 fiber, which has high strength and good toughness, and the ultimate oxygen index is more than 28. It can effectively enhance the suture strength and the flame retardancy of the suture.
| Weight (g/m) | Flammability | Anti-twist and Bending Performance | Tear Strength (N) | Breaking Strength (N) | ||
| After-flame Time (s) | After-glow Time (s) | After-flame Length (mm) | ||||
| 483.8 | 0 | 0.9 | 33 | Grade 0 | 105 | 2100 |
User pain point:
Existing Problems:Contact with corrosive substances,Dusty,High working frequency,Heavy equipment load;
User loss:Equipment surface damage,Reduced accuracy,Production quality reduction,High maintenance costs;
Product details:
Vertical elastic belt structure:Multiple elastic belts are set at the position where the robot has a large range of motion to give the robot enough space to move, and at the same time, the protective clothing is not too loose to be twisted into the rotating shaft of the robot.
Fragment structure:In order to make the clothing more fit the robot, the piece structure is adopted to make the clothing more three-dimensional.
Send product request
Other supplier products
 |
Automotive interior Flame Retardant Tester | The instrument is suitable for locomotive vehicle materials flame retardant material 45 ° angle of the combustion test.StandardsGB 8965-1998 Fl... |
 |
Low - temperature Impact Test Device for Automotive Wires | Test standard: ISO 6722, ISO 14572, ISO 19642, SAEJ 1128, QC/T 730, JASOD611-2009 Technical parameters: 1） Low temperature impact height: 50-2... |
 |
AATCC Viewing Board | AATCC Viewing BoardStandards:American Association of Textile Chemists and Colorist (AATCC) approved test methods 88B/88C/124/128/143/178.Product In... |
 |
spray water repellency tester | Application: Fabric spray rating tester to determine the resistance of any fabrics, which may or may not have been given a water-repellent finish,... |
 |
Car seat component clearance test bench | Applicable standards: Car seat component clearance test benches usually follow the following domestic and international standards: QC/T 805-2008 ... |
Same products
 |
Carbon Steel Bridge Guardrail | Seller: Wuhan Dachu Traffic Facilities Co., Ltd | Carbon steel bridgeguardrailis an important safety feature that can prevent vehicles from running... |
 |
Customized Thrie-Beam Highway Guardrail | Seller: Wuhan Dachu Traffic Facilities Co., Ltd | Customized Thrie-Beam Highway Guardrailmay include the size and shape of the beams, the spacing b... |
 |
Non Blocked MASH-TL3 Single Steel Guardrail | Seller: Wuhan Dachu Traffic Facilities Co., Ltd | DACHU guardrailis manufactured to AASHTO specifications in M180 Class A or B, and finish types 1,... |
 |
Hot Dip Galvanized W-Beam Guardrail | Seller: Wuhan Dachu Traffic Facilities Co., Ltd | hot dip galvanized w-beam guardrailis cost-effective highway barriers designed to reduce the coll... |
 |
S355JR Steel W Beam Road Crash Barrier | Seller: Wuhan Dachu Traffic Facilities Co., Ltd | This hot-dip galvanized steel W beamis one of the highway safety products from DACHUconforms to A... |
