10/100/1000Mbps Unmanaged PoE switch 2G4FEP
Features
Support the switch between 10/100Base-TX and 1000Base-SX/LX
2*1.25Gbps full-duplex fiber ports and 4*100M Ethernet ports with auto-negotiation function
Support 100M speed rate,MDI/MDIX and half/full-duplex with auto-negotiation function
Each port has the complete LED Indicator light
Support single mode single fiber,single mode dual fiber,multi-mode dual fiber and SFP slot
Support IEEE802.1d Spanning Tree
Support high performance QoS function on each port
Support broadcast storm control
Support 48-56V voltage input
Support 8K MAC table
Support IEEE802.3x flow control and back pressure control
Require no configuration and will instantly operate as soon as you power it up
Small volume,light weight
Low power consumption chip with heat sink built in to ensure longtime efficient operation
Support POE power up to 30W for each port,support IEEE802.3af,IEEE802.3at
The HS 2G4FEP is 1000M POE switch with 1 1000M fiber port and 4 10/100Mbps RJ45 POE ports. We also offer all ports gigabit for higher speed demand networks. It’s suitable for the network which requires cascading switches as well as power supply for 1-4 ending devices.
POE switches offers power supply through Ethernet cables on the basis of normal non-POE functions. There are 2 kinds of POE switches, standard POE and non-standard POE. Non-standard POE switches get outdated with the development of technology. There is big risk of burning as it gives power as soon as ending equipment is connected to it. For standard POE, there is automatic detection before the power supply. It will detect if the ending equipment can bear the power supply or not; it can also detect if power supply is really needed. In this way, there will not risk of buring from compulsive powering.
Most of the current IP cemeras support to be powered with POE switches. So there is no need to arrange extra wiring as normal non-POE switches and it’s more reliable for the IP cameras as there is smart detection before power supply. Without the extra labor work and cost on the cabling, POE switches also help to save lots of money and time. If any changes need to be made for the locations of the IP cameras, it’s also easier for maintance and upgrade as there is no need to worry about the power socket.
As a 48V standard POE switch, HS 2G4FEP is a device which can help you to improve your current network greatly. If you need to transmit network over long distance and there is need for power supply on 1-4 ending devices, it would be the perfect solution for you. 2 fiber and 4/8 POE port models are best selling models for small size LAN networks. Welcome to test!
The HS-2G4FEP is a POE switch designed for network monitoring. It has four 10/100Mbps Ethernet ports and two 1.25Gbps fiber ports. It is designed with imported Marvell chip to achieve lower power consumption and high stability. It extends the transmission distance of a network from 100m to120km via copper cables. There are also many other advantages such as isolation protection, good data security, working stability and easy maintenance.
Shenzhen Huashi Network Technology Co. Ltd. was established in June 2011, which is an original manufacturer of networking and fiber products. We provide poe switch 1000 mbps, switch 1000mbps, 6 port poe switch, gigabit media converter, POE Switch, Ethernet Extender and etc. Want to know more? Please contact us.
Send product request
Other supplier products
 |
Ethernet Over Coax | Huabo Group is the original manufacturer of fiber optic equipment in Shenzhen,China. We mainly deal with 1.25G/10G Fiber Media Converter/ Switch,PO... |
 |
Industrial Ethernet Solutions | What Is Industrial Ethernet Solutions? Industrial-grade Ethernet switches are switches that transmit data from Ethernet, which uses a local area ne... |
 |
Managed PoE Swtich | What's the Difference of A Managed POE Switch? Except for all the features of unmanaged POE switch, Managed POE switch also provides the configurat... |
 |
Managed PoE Swtich | What's the Difference of A Switch Managed Poe? Except for all the features of unmanaged POE switch, Managed POE switch also provides the configura... |
 |
Core Switch | What Is Core Switch? Core switch, also called by backbone switch, serves as the gateway to a Wide Area Network. They are the last aggregation part ... |
Same products
 |
Indoor Wall Mounted Mini Fiber Optic FTTH Terminal Box 4 Ports White | Seller: Shenzhen UnitekFiber Solution Limited | UnitekFiber supplies 4 ports wall mounted opticsFaceplate & FTTH Terminal Box. This fiber opt... |
 |
Introduction of Bulk Fiber Optic Cables Assembly | Seller: Shenzhen UnitekFiber Solution Limited | Bulk fiber optic cable for saleassemblies are convenient and economical fiber cable devices to ru... |
 |
Description of breakout fiber optic cable | Seller: Shenzhen UnitekFiber Solution Limited | optical breakout cablealso can be called as distribution fiber optical cable is designed for Indo... |
 |
AOC Active Optical Cable 40G QSFP to-4 x 10G SFP+ Breakout AOC Cable 5M | Seller: Shenzhen UnitekFiber Solution Limited | Active optical cable, as a main transmission medium for high-performance computers and data cente... |
 |
Introduction of Anti-rodent Fiber Optic Cable | Seller: Shenzhen UnitekFiber Solution Limited | The rodent proof fiber optic cableis suitable for use in many places with lots of rats. The anti ... |
