HC Tension Cable Clamp
HC Tension clamp, use for ADSS cable, and choose the type according to the diameter of ADSS cable.
Hook tension wire clamp is designed to provide a suspension for Ø8 to 20mm aerial ADSS cables at intermediate poles on cable routes with angle < 20° on access networks (spans up to 100m). The tension clamp for adss cableconsists of a galvanized steel J Hook, a neoprene sleeve and tightening screw.
As one of the most experienced and professional tension cable clamp manufactuer/supplier, TUOLIMAexports its tension clamp for aerial cableall over the world. With the reliable quality, TUOLIMA ADSS tension clamphas won its reputation all over the world. If you want to find a trustworthy adss cable tension clampsupplier, TUOLIMA is your perfect choice. If you are interested in our adss cable clamps, you can check the details below. Or you can contact us for more information about TUOLIMA bolt type optic cabl tension clampdirectly.
Details of HC Tension Cable Clamp for ADSS/Fiber Cable
The available fiber diameter range is: 5-8mm / 8-12mm / 10-15mm / 15-20mm;
Front and back ports for fiber optic cable;
stainless steel and TPR soft material.
Specification of HC Tension Cable Clamp
|
MODEL |
Cable Diameter |
Material |
MBL |
Weight |
|
HC |
5-8mm |
Plastic and stainless steel |
4kN |
194g |
|
HC |
8-12mm |
Plastic and stainless steel |
4kN |
160g |
|
HC |
10-15mm |
Plastic and stainless steel |
4kN |
/ |
|
HC |
15-20mm |
Plastic and stainless steel |
4kN |
/ |
Packing and Comments of HC Tension Cable Clamp for ADSS/Fiber Cable
|
Package contents |
HC customized package 200pcs/CTN |
|
Package dimensions (W*H*D) |
|
|
Package material |
Standard carton for sea shipping or air express |
|
Weight |
25kgs |
Send product request
Other supplier products
| TGJS-901 Dome Type Fiber Optic Splice Closure | GJS-901 is vertical/Dome type Splice Closure, and its installation is quite simple. This fiber optic dome closurecan be placed in aerial, undergro... | |
| TLM-P Dead-end Guy Grips | The TLM-P dead end guy gripor preformed guy gripis widely used for the installation of bare conductors or overhead insulated conductors for transmi... | |
| Fiber Optic Distribution Box | Fiber distribution boxis used as a termination point for feeder cable to connect with drop cable in FTTX communication network. The fiber splitt... | |
| 1*4 Card-Type Fiber Optic Splitter | Optical splitter is a part of passive components (also called optical passive components) in the process of optical transmission. Like coaxial cabl... | |
| Fiber Optic PLC Splitter | Fiber optic PLC splitter's indicators are based on the planar wave-guide technology. The fiber optic plc splitterprovides a low-cost and perfect po... |
Same products
| Indoor Wall Mounted Mini Fiber Optic FTTH Terminal Box 4 Ports White | Seller: Shenzhen UnitekFiber Solution Limited | UnitekFiber supplies 4 ports wall mounted opticsFaceplate & FTTH Terminal Box. This fiber opt... | |
| Introduction of Bulk Fiber Optic Cables Assembly | Seller: Shenzhen UnitekFiber Solution Limited | Bulk fiber optic cable for saleassemblies are convenient and economical fiber cable devices to ru... | |
| Description of breakout fiber optic cable | Seller: Shenzhen UnitekFiber Solution Limited | optical breakout cablealso can be called as distribution fiber optical cable is designed for Indo... | |
| AOC Active Optical Cable 40G QSFP to-4 x 10G SFP+ Breakout AOC Cable 5M | Seller: Shenzhen UnitekFiber Solution Limited | Active optical cable, as a main transmission medium for high-performance computers and data cente... | |
| Introduction of Anti-rodent Fiber Optic Cable | Seller: Shenzhen UnitekFiber Solution Limited | The rodent proof fiber optic cableis suitable for use in many places with lots of rats. The anti ... |
















