5watts Indoor 1900Mhz Signal Repeater
5watts 1900mhz repeater ST-1900&5W Max coverage 6000sqm
What is the Tele signal booster?
Mobile Signal Booster is specially designed for the “blind zones” of offices,Website:, family rooms, underground
parking garage, cars, lifts, elevators, factories, bars,supermarkets, mountain areas,marines, deserts,
high ways,tunnels,etc, where the signal is very poor. Or in spite of full bar signals on the mobile ,
there is a break in voice leading to call clarity problem. Simply place the mobile booster in such
places, you'll be astonished with the huge gain in both the incoming reception and outgoing transmission
levels as the mobile signal booster goes to work!
Specification of Mobile Signal Repeater ST1800&2W
specifications
uplink
downlink
Bandwidth
Frequency Range:
1850~1910MHZ
1930~1990MHZ
60MHZ
Max Gain
76dB±1
83dB±1
Ripple in Band
≦8dB
Max. Input Power Without Damage
0dBm
Output Power
3watts
5watts
Noise Figure @ max. gain
4.5dB
8dB
Return loss
≦ -8 dB
Auto Level Control
30dBm
MGC
31db@1dB/step
Time Delay
≦0.5 μs
MTBF
＞ 20000 hours
Power Supply
AC：110~240V， 50Hz/ 60Hz；DC：27V 3A
Power Consumption
81W
Impedance
50 Ω
RF Connector
N -Female
Cooling
Heatsink Convection cooling
Amplifier size(D x W xH ) / packing size (D x W xH )
235X170X52(MM) /396X235X83（mm）
Net weight / gross weight
2.15KG/2.9KG
Installation Type
Wall Installation
Third-order intermodulation
45DB
Humidity
< 90%
Operating Temperature
-10℃ ~ 55℃
Terms and Conditions
Certificate
CE/RoHs
Country of Origin
China
Port of Dispatch
Shenzhen
Production Capacity
1000pcs/month
Date of Delivery
Within 3 days after received payment inform
MOQ
10pcs
Warranty
2years
Pacakge
1pcs/box; 10pcs/carton
Country of Origin
China
Mobile Phone signal Booster Installation complete kit items
Signal booster
Outdoor antenna
Indoor antenna
Cable
Splitter (When there are more than 2 indoor antennas)
Connector(N connector, F connector, N to F connector, SMA connector etc)
Mobile Phone Signal Repeater Installation Steps
Step 1: Install the outdoor antenna in a suitable place
Step 2: Connect the outdoor antenna to the booster “outdoor” side by cable and connector
Step 3: Connect the indoor antenna to the booster “indoor” side by cable and connector
Step 4: Connect to the power
Features
Elegant appearance, mini size, light weight
Easy installation.
No interference to the base station, no harm to people health.
CE & RoHS proved.
Low consumption.
ALC technology.
Stable performance.
Environment Friendly, Energy-Efficient.
Comply to the ETS300 694-4 standard
Comply to the GB6993-86 standard
Wide band repeater to support signals of all operators.
High-integration (One board to contain low-noise amplifier, frequency selection module, power amplifier module, both uplink and downlink one for all).
Manual gain control, Automatic gain control, Artificial Intelligence function can protect the repeater together the BTS perfectly.
Auto shut off function as final step to avoid severe interference with mobile net network and energy saving.
LED Indicates
LED
Status
Definition
Power
Red
Normal
Off
DC power problem
DL(Downlink)
White
No signal received
Solution: Adjust the outdoor installation to get sound signal(see page 14)
Green
Signal received ok but not perfect
Solution: Adjust the outdoor installation to get sound signal(see page 14)
Red
Full signal received
UP(Uplink))
Flicker
When there is a call, it is normal
Green
Always green means self-excited
Solution: Turn off the booster, adjust the indoor and outdoor antenna again, and try to expand the distance or create some barriers between them.
Other supplier products
All supplier products
Same products
