Fabric Far Infrared Energy Conversion Pathway Mapper
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Application
Quality control and performance evaluation of natural fibers such as cotton and wool.
Assessment of synthetic fibers, including polyester, nylon, and blended yarns.
Measurement of far-infrared emissivity of woven, knitted, and nonwoven fabrics.
Evaluation of finished garments and functional textiles (heat-retaining, moisture-wicking).
R&D support for new fiber blends and smart textile development.
Compliance testing for international markets requiring thermal performance data.
Process optimization for textile manufacturing based on far-infrared performance.
Standards
GB/T 30127.4-2013: Determination of Far-Infrared Emissivity of Textile Materials (China)
ISO 18562-3:2017: Test methods for far-infrared properties of textiles
ASTM E1933: Standard Test Method for Measuring the Far-Infrared Emissivity of Materials
EN 14505: Clothing for protection against heat and flame — Measurement of thermal properties
ISO 11092: Textiles — Physiological effects — Measurement of thermal and water-vapour resistance
Features
(1) Sequential blackbody and sample measurement for accurate emissivity evaluation.
(2) Far-infrared spectral range 5–14 μm for comprehensive textile analysis.
(3) High-precision heating plate with temperature control ±0.5°C.
(4) Non-destructive testing method preserving sample integrity.
(5) Touchscreen interface with intuitive menu-based operation.
(6) Lock-in and microelectronic signal processing for detecting weak far-infrared radiation.
(7) USB and network interface for data export and software integration.
(8) Compact, lightweight design suitable for laboratory and R&D environments.
(9) Supports both natural and synthetic fibers, woven and nonwoven fabrics, and finished textile products.
Technical Parameters
| Item | Detail |
|---|---|
| Measuring range | 0.01–1.00 |
| Wavelength | 5–14 μm |
| Test temperature | 34°C |
| Thermal plate diameter | Φ60 mm |
| Temperature control accuracy | ±0.5°C |
| Power supply | 220 V, 50–60 Hz |
| Dimensions | 160 × 180 × 350 mm (6.30 × 7.07 × 13.78 inch) |
| Net weight | 15 kg (33.07 lb) |
Test Procedures
Place the standard blackbody panel on the heating plate and set the desired temperature.
Sequentially place the textile sample on the heating plate after blackbody measurement.
Allow the sample to reach thermal equilibrium.
Measure the far-infrared radiation intensity of both the blackbody and sample.
Calculate the far-infrared emissivity as the ratio of sample radiation to the blackbody radiation.
Record and analyze results using the software interface.
Repeat measurements as necessary for different sample types or temperatures.
Maintenance Information
Clean blackbody and thermal plates regularly to maintain measurement accuracy.
Periodically calibrate the far-infrared measurement system using certified reference materials.
Inspect the heating plate, sensors, and electronics for wear or damage.
Keep the instrument in a dry, dust-free environment to prevent interference or damage.
Ensure software and firmware are updated for optimal performance.
Avoid mechanical shocks to maintain sensor precision.
Send product request
Other supplier products
 |
Intramedullary Nails Four - point Bending Fatigue Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard YY/T 0591-2011: Chinese standard specifying bending fatigue test methods for intr... |
 |
Fingertip abrasion tester for coatings and paints | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard (1) IEC 68-2-70 – Mechanical durability of materials via fingertip/hand sim... |
 |
Prefilled Syringe Plunger Force Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Push - force Tester for Prefilled Syringes is widely used in the medical device industr... |
 |
Carpet Flammability Test device | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard BS 4790: Hot Metal Nut Method for Floor Covering Fabrics ISO 6925: Ambient Tempe... |
 |
ASTM F2707 High Temperature Half Mannequin | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com This head and torso are designed for use in the testing of clothing and headg... |
Same products
 |
Composite Flame Retardant For Adhesive XS-FR- 308/XS-FR-708 | Seller: Zhejiang Xusen Flame Retardants Incorporated Company | XS-FR-308/XS-FR-708 are nitrogen phosphorus composite, low smoke intumescentflame retardants, whi... |
 |
Nylon High Strength Sewing Thread | Seller: Hangzhou Fantex Textile Co., Ltd | Nylon high strength sewing thread(nylon thread) selects high toughness nylon filament as raw mate... |
 |
HMPE Yarn | Seller: Hangzhou Fantex Textile Co., Ltd | Fantex high strength polyethylene yarn is a premium HMPE Yarn(High Modulus Polyethylene Yarn), re... |
 |
Nylon Fishing Twine | Seller: Hangzhou Fantex Textile Co., Ltd | Our nylon fishing twineis made from high tenacity nylon twine , ensuring a long-lasting and relia... |
 |
High Tenacity Polyester Bonded Thread | Seller: Hangzhou Fantex Textile Co., Ltd | High Tenacity Polyester Bonded Threadis a kind of industrial filament sewing thread made of high ... |
