Building Materials Single Burning Item Flammability Testing Device
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
GB 8624-2012: building materials and product combustion performance rating
GB/T 20284-2006: "single combustion test for building materials or products"
EN 13823:2002 :"building products fire response - single combustion test method for building products without paving materials"
ISO – Plastics—Smoke Generation, Part 2: Single-Chamber Test for Optical Density
ASTM E662-2014 – Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
BS 476-6:1989 – Fire Tests on Building Materials: Method of Test for Fire Propagation
EN 13501-1:2007 – Fire Classification of Construction Products and Building Elements, Part 1: Reaction to Fire
Principles
Consisting of two right angles to the vertical wing exposed to the bottom of the right Angle of the samples produced by the main burner flame, the flame is produced by propane gas combustion, propane gas through the sand box of burner and produce (30.7 + 2.0) kW heat output. The combustion performance of the sample was evaluated by the test process of 20min. Performance parameters include: heat release, smoke production, flame propagation and combustion of particulate matter.
Features
1. the computer data acquisition system can automatically record the oxygen concentration, concentration of carbon dioxide, smoke density, flue temperature, environment temperature and humidity (data collection interval 3 s), can be automatically calculated the heat release quantity, THR600s, gas production rate index and smoke production rate;
2. The combustion chamber shall be installed with a screw fixing cabinet, which can be disassembled; The thermal insulation exhaust duct, the insulation gas cover and the thermal collector adopt double layer insulation function to ensure the accuracy of data collection.
3. The combustion control system adopts the gas solenoid valve to ensure the safety of the equipment;
4. High degree of automation and easy to learn;
5. System modular design for easy maintenance.
Electronic hardware:
The control core adopts imported omron PLC and temperature expansion module to reduce interference and improve stability.
The output terminal adopts the new solid-state contactless switch device of schneider, with high reliability, low noise and fast switching speed.
The data interface adopts rs-232 standard serial port communication, stable data, high reliability and easy to use.
Test process safety: the combustion control system adopts the gas solenoid valve, and the igniter adopts the automatic ignition method.
Software part:
Friendly software interface, easy to operate.
The software control system includes automatic control and manual control.
Automatic control mode can run automatic control equipment, automatic detection, automatic data collection, automatic display test curve, completion test, at the same time also can automatically generate test results, the automatic generation of test report, etc.
The manual control mode can help the debugging function of the equipment.
Parameters
| Item | Specification |
|---|---|
| Combustion laboratory size | 3000mm * 3000mm * 2800mm |
| Outline dimensions of smoke pipe in combustion chamber | 5200mm * 3000mm * 1800mm |
| Control box outline dimension | 800mm * 1200mm * 1500mm |
| Smoke extraction speed | 0.50m³/s ~ 0.65m³/s |
| Temperature measurement device | Imported K-type armored thermocouple, 3mm diameter |
| Temperature measurement precision | ±0.5℃ |
| Accuracy of pressure sensor | (Not specified) |
| Test time | 1560s; Time recording system accuracy: 0.1s |
| Oxygen analysis (paramagnetism) range | (0-25)% |
| Oxygen analysis response time | <12s |
| Oxygen analysis noise drift (within 30min) | ≤100 x 10⁻⁶ |
| Oxygen analysis data collection and output resolution | >100 x 10⁻⁶ |
| Carbon dioxide (IR) measurement range | (0-10)% |
| Carbon dioxide measurement linearity | >1% of full range |
| Carbon dioxide data collection and output resolution | >100 x 10⁻⁶ |
| Detector color standard accuracy | ±5% |
| Detector output linearity (transmittance) | <3% |
| Detector absolute penetration rate | <1% |
| Test environment temperature | (10 ~ 30)℃ |
| Control cabinet power supply voltage | AC 220V 50HZ |
| Maximum equipment power | 11.5KW |
| Alarm condition | Flue gas pipeline temperature >400℃ |
| Sample adjustment status temperature | (21-25)℃ |
| Sample adjustment status humidity | (45-55)% RH |
| Distance of test piece from opposite side | 2100mm |
Environment requirements
Power supply voltage: AC 220V 50HZ safety ground wire;
380V 11KW three-phase power supply safety ground wire;
Laboratory temperature (23 + 2) ℃;
Laboratory humidity :(40-60)%RH;
Test equipment area: 4m x 5.5m by 5m
Test principle
A sample consisting of two vertically angled vertical wings is exposed to the flame produced by the main burner at the bottom of the right angle, the flame is produced by the combustion of propane gas, the propane gas passes through the sandbox burner and produces (30.7 ± 2.0) kW of heat output The
The combustion performance of the sample was evaluated by the entire test procedure of 20 min. Performance parameters include: heat release, smoke production, flame propagation and burning dripping and particulate matter.
Prior to igniting the main burner, the heat output and smoke generation of the burner itself should be measured for a short time using the auxiliary burner remote from the sample.
Some parameters can be measured automatically, while others can be obtained by visual inspection. The smoke pipe is equipped with a sensor for measuring the temperature, light attenuation, the mole fractions of O2 and CO2. and the airflow in the pipeline. These values are automatically recorded and used to calculate the volumetric flow rate, heat release rate (HRR) and smoke rate (SPR).
The transverse propagation and burning of the flame and the particulate matter can be measured using a visual method.
Send product request
Other supplier products
 |
Seatbelt Fabric Pilling Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Seatbelt Fabric Pilling Tester is designed to simulate the pilling and wear of garments... |
 |
Burn rate evaluation equipment | Whats/App: +86 156 1874 6768 Web: standard-groups.com This product complies with "Recommendations on the Transport of Dangerous Goods - Manual of... |
 |
Advanced Multi-Axis Tribometer for Tribology Laboratory | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Multi-Axis Tribometer is a versatile tribological testing device for stud... |
 |
Multi-Functional Tribology Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Multi-Functional Tribology Tester is a high-precision friction and wear testing system ... |
 |
UV & Carbon Arc Light Exposure Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications The Carbon Arc Aging Chamber employs alternating current to ignite carbon rod... |
