Flammability test furnace for building materials
Product Introduction
Touch screen control building materials flammability test furnace adopts stainless steel box, is in the old JCK-2 products based on the new touch screen control sample controlled automatic lifting, Bunsen lamp can adjust the function of the upgrade product, is strictly in accordance with the national standard GB8626-2007 and the production of high configuration building materials combustion grade test instrument.
Building materials flammability test furnace is in the normal combustion environment, with a small flame directly impact vertically placed samples to determine the flammability of building products Building materials flammability test furnace using the German KLEINBRENNER(Kleinbrenner) principle, in the vertical direction of the small flame direct impact, It is used to determine the combustion performance of Class B building materials (that is, it is used to determine the combustion performance of building materials/flame retardant grade B)。
Meet the standard
IS011925-2:2002E "Test Method for Flammability of Building Materials"
GB/T8626-2007 "Combustibility test Method for Building Materials"
Technical parameters
Ambient temperature :15 °C ——25°C
Relative humidity :S85%
Supply voltage and power :220V 50HZ100W
Gas source: commercial propane with a purity of not less than 95%, ordinary tests can also be replaced by liquefied petroleum gas (Note: gas source and link head user's own)
The Bunsen burner applies a flame time of 15S to the pattern
MCU control, digital display
The diameter of the burner is 0.17MM, the flame length of the Bunsen burner
20MM+1MM, the burner can be tilted 45°
Apply flame (1S-99S)+0.5S to the sample, which can be adjusted arbitrarily
Accuracy ±0.2S
Combustible gas source: propane with purity above 95%
Send product request
Other supplier products
 |
High Velocity Impact Testing Machine | Main Purpose To test the impact - resistance performance of glasses, goggles and face shields at a certain speed. Applicable Standards SNELL SA/... |
 |
Building material flame retardancy test furnace，building code compliance equipment | Technical parameters: Gas used: methane flow rate (35 ± 0.5)L/min, its purity is greater than 95%, air flow rate (17±0.2)L/min Spec... |
 |
Microbial Barrier Tester | Product Introduction: Y/T 0471.5-2017 is a newly updated standard, which specifies the experimental method for evaluating the bacteria-inhibiting ... |
 |
Athletic Footwear Shock Attenuating Tester | The Athletic Footwear Shock Attenuating Tester is primarily used to test the shock energy absorption performance of single materials or material st... |
 |
Metal Bone Screws Self - tapping Tester | Standard ISO 6475: Implants for surgery – Wear of total hip-joint prostheses ASTM F543: Standard Specification and Test Methods for Metalli... |
Same products
 |
Fabric Flame Retardant Tester | Seller: Qinsun Instruments Co., LTD | Product details A method is used to determine the damaged area and the length of the damage when... |
 |
Burning Manikin System | Seller: Qinsun Instruments Co., LTD | Product details The burning manikin system is used to test the overall thermal protection perfor... |
 |
Steel Structure Fireproof Coatings | Seller: Qinsun Instruments Co., LTD | Product Introduction: Heat insulation efficiency and fire resistance test furnace of steel struc... |
 |
Building material combustion calorific value calorimeter | Seller: Qinsun Instruments Co., LTD | Product details Building material combustion calorific value calorimeter Mainly used for the det... |
 |
Thermal Insulation Rock Wool Thermal Load Tester | Seller: Qinsun Instruments Co., LTD | Introduction： This equipment determines the temperature at which rock wool insulation shrinks un... |
