Dry fallen wadding tester G275
G275 Dry fallen wadding tester, The tester is used to evaluate the fallen wadding test of non-woven fabrics under dry conditions, and is mainly applicable to the evaluation of the shedding performance of raw material non-woven fabrics and other textile materials used for medical protection (surgical orders, surgical gowns, clean clothes, etc.)
1. Test philosophy: The sample is subjected to the combined action of torsion and compression in the test chamber. Air is drawn from the test chamber during this twisting process, and the test result is evaluated by counting and classfying the particles in the air with a laser dust particle counter.
2. This instrument has high-resolution large-size color touch screen and it is easy to oerate and convenient to use. At the same time, it can simultaneously monitor the number of particles in 8 particle size channels and their changes, and store up to 10X500 groups of data. It is typically used in particulate matter testing, air particle research, indoor air quality assessment in clean houses, as well as in filter performance testing and cleanliness evaluation.
Standard:
YY/T 5056.6 Surgical sheets, surgical gowns and cleansing suits for patients, medical staff and equipment - Part4: Dry fallen wadding test method;
ISO9073.10 Test method for textiles and nonwovens - Part 10: lint and other granules produced in dry state;
EN Surgical covers, long coats and non-contaminated suits for paatients, medical staff and medical equipment, part 2: test methods
Send product request
Other supplier products
 |
Falling ball impact meter | Product Introduction: Falling ball impact tester is suitable for testing the fastness of plastic, ceramic, acrylic, glass fiber and other material... |
 |
Falling Sand Abrasion Tester | Applicable Standard JG/T 133-2000 ASTM D968-83 ASTMD333 ASTMD1395 ASTMD2205 Main Purposes It is mainly used to test the abrasion - resistanc... |
 |
Gas Oxidizing Property Tester | Product Description Conforms to ISO 10156-2010 “Gases and Gas Mixtures Selection of Cylinder Valve Exhaust Ports by Determination of Combust... |
 |
Dental Implants Fatigue Tester | Standard ISO 14801:2016: Specifies dynamic fatigue testing protocols for endosseous dental implants, including load ratios, frequency, and failure... |
 |
Safety hat flame retardant performance tester | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retardant performance test, high degree of automation, ea... |
Same products
 |
Steaming Cylinder | Seller: Standard International Group (HK) Limited | Standards ISO 3005. BS 4323. NEXT TM 15. M&S P8. IWTO 29-76 Applications: Used for steamin... |
 |
Drill Flocking Performance Tester丨Drill Flocking Performance Test mechine | Seller: Standard International Group (HK) Limited | Standards GB/T 12705.1/14272. BS EN 12132-1 Applications To determine the ability of penetrati... |
 |
Wrinkle Recovery Tester 丨Wrinkle Recovery Test mechine | Seller: Standard International Group (HK) Limited | Standards AATCC 128, ISO 9867, ENKA 3061 Applications AATCC Wrinkle Recovery Tester is used to... |
 |
Button Impact Tester丨Button Impact Test mechine | Seller: Standard International Group (HK) Limited | Standards ASTM D5171 Applications Button Impact Tester is used to determine the impact resista... |
 |
AATCC Viewing Board丨AATCC Viewing Board tester | Seller: Standard International Group (HK) Limited | Standards Built to American Association of Textile Chemists and Colorist (AATCC) approved test m... |
