.

Face Mask Airflow Resistance Measurement tester

Standards:

GB19083-2010 technical requirements for medical protective masks

Applications:

Quality control in production process.

Testing in research and development.

Fabric Airflow resistance tester also known as air resistance tester is mainly used for the measurement of air textiles and cotton wool,

cotton space such as penetration resistance, the identification of clothing, textiles, medical textiles in particular, comfort and health.

Features:

1. The instrument can be adjusted by the flow of air, the sample holding means, pressure measurement system.

2. Digital display flow resistance with zero calibration and accuracy correction.

3. Easy to operate

4. Fast and accurate measurement and readout of measurement results.

5. Accepts test material of various form and size.

6. Easy setup and use.

7. Large dynamic range of measurement.

Parameters:

1. Air flow adjustment range: 10L / min-100 L / min (600L / h-6000 L / h)

2. Airflow resistance measurement range: 0-1kPa

3. Test time: 1 second to 99 hours optionally

4. Power: AC220V, 50Hz

5. Total Power: 1.2KW


Send product request

To: Qinsun Instruments Co., LTD
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Yellowing resistance test chamber
Yellowing resistance test chamber Applicable standards HG/T3986. ASTM D1748. etc. Scope of application Test method for determining the yellowing resistance of light and white pro...
Cleanliness automatic extractor
Cleanliness automatic extractor Component Cleanliness Cabinet equipped with cleaning modes such as pressure jet cleaning, perfusion cleaning, spray cleaning, etc., the cleaning ag...
Smoke Density Chamber (Horizontal Test)
Smoke Density Chamber (Horizontal Test) The main principle is to measure smoke density in a particular space, cable or material produced under specific conditions of combustion or radiati...
Demesia Zigzag Tester
Demesia Zigzag Tester Compliance Standards IEC60695-2-1(Firehazardtesting) ISO6722(Roadvehicles-60Vand600Vsingle-corecables) ASTMD5422(StandardTestMethodforMechanical...
Water injection counterweight dummy
Water injection counterweight dummy Product Introduction   This counterweight dummy can be filled with water, the torso and the bottom are separated, independently filled with wat...
All supplier products

Same products

Steaming Cylinder
Steaming Cylinder Seller: Standard International Group (HK) Limited Standards ISO 3005. BS 4323. NEXT TM 15. M&S P8. IWTO 29-76 Applications: Used for steamin...
Drill Flocking Performance Tester丨Drill Flocking Performance Test mechine
Drill Flocking Performance Tester丨Drill Flocking Performance Test mechine Seller: Standard International Group (HK) Limited Standards GB/T 12705.1/14272. BS EN 12132-1 Applications To determine the ability of penetrati...
Wrinkle Recovery Tester 丨Wrinkle Recovery Test mechine
Wrinkle Recovery Tester 丨Wrinkle Recovery Test mechine Seller: Standard International Group (HK) Limited Standards AATCC 128, ISO 9867, ENKA 3061 Applications AATCC Wrinkle Recovery Tester is used to...
Button Impact Tester丨Button Impact Test mechine
Button Impact Tester丨Button Impact Test mechine Seller: Standard International Group (HK) Limited Standards ASTM D5171 Applications Button Impact Tester is used to determine the impact resista...
AATCC Viewing Board丨AATCC Viewing Board tester
AATCC Viewing Board丨AATCC Viewing Board tester Seller: Standard International Group (HK) Limited Standards Built to American Association of Textile Chemists and Colorist (AATCC) approved test m...