.

Gurley Stiffness Tester STD-AG84

Application

The Gurley Stiffness Testeris based on the Gurley Softness Tester test method. It applies a certain mechanical external force to the sample and measures its deformation to obtain the bending resistance or stiffness of the material.

The Gurley Stiffness Testeris used to measure the bending resistance (stiffness) of materials such as paper, cardboard, fabric, non-woven fabric, and artificial leather, especially for relatively stiff fabrics.

Standards

TAPPIT543-1994. ASTMD6125-97. IEST-RP-CC021.2(2005

CRAA433

GB/T18318.3-2009

Features

Based on the test method of the Glay softness tester, a certain mechanical external force is applied to the sample to measure its deformation;

The instrument has a simple structure and is easy to use.

Key Specification

Model

STD-AG84-Gurley Stiffness Tester

Teat range

1.39mg~56888mg Gurley stiffness unit

Sample length

25.4mm(1in.),38.1mm(1.5in.),63.5mm(2.5in.),114.3mm(4.5in.)

Sample width

≤50.8mm(2in.)

Sample clamp position (test length)

12.7mm,25.4mm,50.8mm,101.6mm

Swing speed

ω=2r/min

Load weight

5g, 10g, 25g, 50g, 100g, 200g

Swing angle

<±45°

Center distance of weight slot

rl=25.4mm,r2=50.8mm,r3=101.6mm

Power supply

AC220V, 50/60HZ

Dimension

30*48*46cm

Weight

8kg


Send product request

To: Qinsun Instruments Co., LTD
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Adiabatic Self - Accelerating Decomposition Temperature Tester
Adiabatic Self - Accelerating Decomposition Temperature Tester Product Introduction This product complies with "Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria" 28.4.2 Test H...
Plastic ball indentation hardness tester
Plastic ball indentation hardness tester Scope of application: It is used to measure the characteristics of the plastic drainage plate in the plane direction of the water flow under the s...
Safety Helmets Impact and Penetration Resistance Tester
Safety Helmets Impact and Penetration Resistance Tester Standard GB/T 2811-2019(China’s national standard for helmet safety and impact resistance) GB/T 2812-2006/XXXX(Testing methods for impact...
Strip Uniformity Testing Device (for Strip evenness tester)
Strip Uniformity Testing Device (for Strip evenness tester) Product Introduction: Cotton yarn fiber strip analyzer is a high performance, high test efficiency of textile laboratory instrument, it is used to...
Non-combustibility Tester
Non-combustibility Tester Product details Non-combustible material refers to the material when it is heated by the fire even if it become the red or melting, which will not...
All supplier products

Same products

Steaming Cylinder
Steaming Cylinder Seller: Standard International Group (HK) Limited Standards ISO 3005. BS 4323. NEXT TM 15. M&S P8. IWTO 29-76 Applications: Used for steamin...
Drill Flocking Performance Tester丨Drill Flocking Performance Test mechine
Drill Flocking Performance Tester丨Drill Flocking Performance Test mechine Seller: Standard International Group (HK) Limited Standards GB/T 12705.1/14272. BS EN 12132-1 Applications To determine the ability of penetrati...
Wrinkle Recovery Tester 丨Wrinkle Recovery Test mechine
Wrinkle Recovery Tester 丨Wrinkle Recovery Test mechine Seller: Standard International Group (HK) Limited Standards AATCC 128, ISO 9867, ENKA 3061 Applications AATCC Wrinkle Recovery Tester is used to...
Button Impact Tester丨Button Impact Test mechine
Button Impact Tester丨Button Impact Test mechine Seller: Standard International Group (HK) Limited Standards ASTM D5171 Applications Button Impact Tester is used to determine the impact resista...
AATCC Viewing Board丨AATCC Viewing Board tester
AATCC Viewing Board丨AATCC Viewing Board tester Seller: Standard International Group (HK) Limited Standards Built to American Association of Textile Chemists and Colorist (AATCC) approved test m...