SAPPHIRE INGOTS/RODS
Sapphire ingotsare typically used as raw materials for further processing. These sapphire rods and sapphire ingots are uniformly shaped, usually as cylinders. The most sapphire crystal grows in A-axis, and the most widely used sapphire substrate in the LED market is its C-plane (0001). Therefore, it is necessary to drill the c-plane sapphire ingot from the side of the crystal.
As the sapphire ingot manufacturers, CRYSCORE provides sapphire rods and ingots with ground surfaces for further processing and polishing. They are cored from high-grade Kyropoulos grown boules. We supply dia. 2-inch to 8-inch sapphire rod and ingot with any orientation and custom specifications. Flats are available upon request.
Specifications of Sapphire Ingot/Rods
|
Item |
Sapphire Ingots |
|
Crystal Materials |
99,999%, High Purity, Monocrystalline Al2O3 |
|
Orientation |
C-plane(0001), A-plane(11-20), M-plane(10-10), |
|
R-plane(1-102), N-plane(11-23), V-plane(22-43) |
|
|
Diameter |
2-inch, 4-inch, 6-inch, 8-inch, etc. |
|
Flat |
Upon request |
|
Surface Finish |
Fine Ground |
|
Packaging |
Single piece packaging |
Since 2008, CRYSCORE OPTOELECTRONIC LIMITED has been an expert among so many sapphire wafer manufacturers, specializing in high-quality sapphire wafers and optical windows. With over 12 years of experience, CRYSCORE provide 1-inch to 8-inch standard or custom sapphire wafers with any orientation and any thickness applied to epitaxy, as well as sapphire windows with any specifications applied to sapphire optics. Patterned sapphire substrates and sapphire ingotalso can be provided.
CRYSCORE can provide standard or custom sapphire waferwith any orientation applied to epitaxy, as well as sapphire windowswith any specifications applied to optics. Patterned sapphire substratesand sapphire ingots also can be provided. Expert in sapphire optics manufacturing.
Send product request
Other supplier products
 |
SAPPHIRE WAFERS / SAPPHIRE SUBSTRATES | Due to the less mismatched lattice and stable chemical and physical properties, c plane sapphire wafersis the popular substrates for III-V nitrides... |
 |
8 INCH C-PLANE(0001) SAPPHIRE WAFERS | The 8-inch sapphire waferscan enable chip makers to roll out more productivity, which will help them drive down costs dramatically. CRYSCORE is ... |
 |
A-PLANE (11-20) SAPPHIRE WAFERS | A plane sapphirewafers have a uniform dielectric constant and highly insulating characteristic, so they are generally used for hybrid microelectron... |
 |
SAPPHIRE WAFERS / SAPPHIRE SUBSTRATES | Due to the less mismatched lattice and stable chemical and physical properties, sapphire(Al2O3) wafer is the popular substrates for III-V nitrides,... |
 |
4 INCH C-PLANE(0001) SAPPHIRE WAFERS | Wafer saphiris being used extensively as a substrate for III-V nitrides and for many other epitaxial films. We supply 99.999% high purity sapphire ... |
Same products
 |
Colombia Color Pear Cut Lab Grown Emerald | Seller: Guangxi Wuzhou Starsgem Co., Ltd | Colombia Color Pear Cut Lab Grown Emerald Product Description Material Lab grown e... |
 |
STANDARD SAPPHIRE WAFERS (C-PLANE) | Seller: CRYSCORE OPTOELECTRONIC LIMITED | CRYSCORE can offer Epi-Ready grade sapphire wafer with a very low surface roughness in complete o... |
 |
SAPPHIRE WINDOWS | Seller: CRYSCORE OPTOELECTRONIC LIMITED | Sapphire has a wide transmission range, spanning the three wavelength bands of ultraviolet, visib... |
|
|
SAPPHIRE WAFERS / SAPPHIRE SUBSTRATES | Seller: CRYSCORE OPTOELECTRONIC LIMITED | Due to the less mismatched lattice and stable chemical and physical properties, c plane sapphire ... |
|
|
SAPPHIRE INGOTS/RODS | Seller: CRYSCORE OPTOELECTRONIC LIMITED | Sapphire ingotsare typically used as raw materials for further processing. These sapphire rods an... |
