Jar Intensifier
Jar Intensifier Type YJQ
Jar Intensifier Type YJQ is designed on the principle of compressible fluid. It is used in conjunction with Fishing Jar Type YSJ and Super Fishing Jar Type CSJ respectively. It is installed above the fishing jar and the drill collar in operation. Its function is to impart acceleration to the up jarring rod so that the optimum upward jarring effect is obtained.
TYPE O.D.
in(mm) I.D.
in(mm) Tool Joint
Connection
API Max.Tensile
Load
Lbf(N) Updraw Full Stroke
Pulling Load
Lbf(N) Max. Stroke
in(mm) Overall Length
ft-in(mm)
YJQ36 3-3/4(95) 1-1/4(32) NC26 112,410(500,000) 44,960(200,000) 13(330) 9’4”(2845)
YJQ40 4(102) 1-1/4(32) NC31 134,890(600,000) 56,250(250,000) 13(330) 12’9”(3837)
YJQ42 4-1/4(108) 1-1/4(32 NC31 157,370(700,000) 56,250(250,000) 13(330) 12’9”(3837)
YJQ44 4-1/2(114) 1-1/2(38) NC31 179,850(800,000) 67,440(300,000) 8-1/2(216) 11’3”(3422)
YJQ46 4-3/4(121) 1-1/2(38 NC38 202,340(900,000) 78,680(350,000) 9-1/4(234) 10’8”(3254)
YJQ56 5-3/4(146) 2 (51) NC40 224,820(1,000,000) 89,920(400,000) 13(330) 12’9”(3878)
YJQ62 6-1/4(159) 2-1/4(57) NC50 337,230(1,500,000) 157,370(700,000) 13-1/8(338) 14’4”(4375)
YJQ65 6-5/8(168) 2-1/4(57) NC50 359,710(1,600,000) 168,610(750,000) 13-1/8(338) 14’4”(4375)
YJQ70 7(178) 2-3/8(60) NC50 404,670(1,800,000) 179,850(800,000) 12-1/2(320) 13’2”(4019)
YJQ76 7-3/4(197) 3(76) 6-5/8REG 472,100(2,100,000) 224,820(1,000,000) 13-1/2(341) 13’11”(4238)
YJQ80 8(203) 3(76) 6-5/8REG 562,050(2,500,000) 269,780(1,200,000) 13-1/2(341) 13’11”(4238)
YJQ90 9(229) 3(76) 7-5/8REG 674,460(3,000,000) 303,500(1,350,000) 13-1/2(341) 13’9”(4180)
Other supplier products
|
|
MANUAL TONGS |
Manual Tongs are necessary tools applied to make up and break out pipes. Changing lug jaws and latch steps can adjust different handling sizes of t... |
|
|
Traveling Block & Hook |
Design Features：
The housing assembly is made of thick section steel plate to provide enough weight.
The wire line is kept taut when hoisting or ... |
|
|
Drill Pipe |
Drill Pipe
Standard: API 5D
Specification: OD: 2 3/8”-6 5/8”
Steel Grade: E75, X95, G105, S135
Internal Coating: TK34, TC2000, TC3000
Hardband... |
|
|
Safety Clamps |
Safety Clamps are the essential hold-up device for drilling string and drill tools. When adjusting the working range, it only needs to reassemble c... |
|
|
Hole Opener |
The Fixed Diameter Hole Opener
It is made of tough heat treated alloy steel for maximum strength. Cutter arms, equipped with removable cutter, ar... |
All supplier products
Same products
