Felt Disc Flat Type
felt disc flat type
Flat type steel wool polish chromeis specially designed for mirror finishing & polishing requirements.
It's different like normal flap discs and the disc's density can be 2.0g/cm3 to 8.0g/cm3 which provide cooler & flexible polishing performance.
Felt polishing flap disc can be used to eliminate scratches and brighten the surface. It can also be used as one of the combined polishing wheels to eliminate scratches on shallow surfaces. It can be used with polishing powder coolant.
Features of Felt Disc Flat Type
Felt materials can make of different densities, thicknesses, and hardness, with fiber-glass backing or plastic backing.
A firmer version is suggested to polish fat components and prepare for finer processing.
The softer version is more suitable for more gloss and shining surfaces.
Three different shapes allow the felt discs to apply to complicated geometries.
Felt Disc Flat Type Applicable Industries
Applicable Industries
Polishing and mirror finishing
Marble polishing
Hardware work piece mirror polishing
Cleaning the surface of non-ferrous metal
Polish in the last step of the process, cleanliness can achieve mirror effect.
Recommendations for Use
For best performance, use with a recommended cutting speed of 5–10 m/s. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the work piece and tool wear.
Felt points and discs:
Use diamond polishing pastes and polishing paste bars.
Use polishing and grinding pastes.
When changing the polishing paste, use a brand-new polishing tool.
Matching Tool Drives
Angle grinder
Cordless angle grinder
Safety Instructions of Felt Disc Flat Type
How To Felt Disc Flat Type
Instructions:
Please try to choose operation indoors environment and wear protective guards and goggles.
Never to exceed the recommanded maximum permitted rotational speed for safety reasons.
In order to have a gppd syocl removal rate, quality of surface and thermal laoding on the workpiece, the best performace would with a recomended cutting speed at 15-20m/s.
Don't push and increase the pressure during the processing to achieve a finner surface looking, but try to switch to diffirent grit flap wheels.
Safety Warning:
The clamping lenght between shank and grinders should be more than 15mm.
Never exceed the maximum safe speed when the shank is extra long. Try to consult your sales to check the safety rotating speed before use.
If you have any questions, please contact us immediately
If you have needs to buy abrasive flap wheel, please contact us.
As an abrasives factory, we can offer kinds of related products for salw, anything you need, please leave us a message.
Send product request
Other supplier products
 |
Cartridge Rolls With Shank 25/32inch | Table of Cartridge Rolls with Shank 25/32inch Cartridge Rolls with Shank 25/32inch Specification: Diameter: 25/32 inch=20mm Raw Materials: A... |
 |
Grinding Head G - Triangular Trapezoid Shape (TT) | KEYING Mounted Head is made of imported raw materials and special equipment with automatic production and excellent quality. These products are des... |
 |
Flap Wheel (Arbor Hole) | This non-standard custom abrasive flap wheel for mandrel assembly is a Straight Hole Type, common mounted flap wheels specifications have 8mm hole ... |
 |
Grinding Head X | KEYING Rubber Mounted Head has a variety of specifications and granularity, accept non-standard size customization, including diameter, handle diam... |
 |
FINE POLISHING AND FINISHING | Fine polishingis the process of generating a reflective surface. Typically, polishes are created by using micron or sub-micron abrasive particles... |
Same products
 |
Turnbuckle Hardware | Seller: Hebei Yipeng Line Equipment Manufacture Co., Ltd. | Turnbuckle Hardware The Ultimate Guide to If you're involved in construction, rigging, or ... |
 |
Turbo Blower/Multistage Centrifugal Blower/Vacuum Pump | Seller: Greentech International (Zhangqiu) Co., Ltd | Greentech International (Zhangqiu) Co., Ltd is the professional blower supplier. Multistage Centr... |
 |
Fastener riveting machine | Seller: Wuhan Rivet Machinery Co.,Ltd | Specification: Riveting diameter Φ 16mm (solid steel rivet) Riveting pressure ... |
 |
Custom Dam Gates Hoist Hydraulic Cylinders with Bore Diameter 450mm | Seller: Eooe Hydraulic Co., Ltd. | Custom Dam Gates Hoist Hydraulic Cylinders with Bore Diameter 450mm The Hydraulic Cylinderis an ... |
 |
Pneumatic riveting machine | Seller: Wuhan Rivet Machinery Co.,Ltd | Specification: Max. riveting diameter Φ 3mm (solid steel rivet) Max.riveting pre... |
