HEAVY DUTY HIGH LOAD LIVE CENTER
Brief introductionHEAVY DUTY HIGH LOAD LIVE CENTER, machine tool parts in machining. Tail with a taper shank, installed in the machine tool spindle taper or tailstock shaft hole, with its head against the workpiece cone. Can be used to face the complex parts and do not allow the central hole of the supporting parts. The top is mainly composed of a thimble, a clamping device, a shell, a fixed pin, a bearing and a core shaft. Thimble is the top of the inner hole of the center hole or pipe material, on the other end can be top end is a spherical or conical parts, thimble by the clamping device fixed. When the parts are not allowed or can not hit the central hole, the use of the clamping device to clamp the turning. The shell and the core shaft drill with pin hole, removing of the fixed pin pin or, to achieve the top two. Top can also be used for the work of the drilling, casing and hinge hole.Specifications1. material:mandrel use bearing stell GCr152. hardness:HRC58-60,high rigidity and high durability3. precision≤5μ,high speed 12000rpm4. Live center adopts precision matched angular contact bearing and integration with roller bearing,ensure high concentric precision.5. Sealing ring at the fron end is dust proof and water proof,can avoid coolant influene the bearing,prolong the life of the live center.1. Application and features:It is an necessary accessory used on medium type lathe for such machine tools as spindle sleeve,tubes and other parts on lathe,locked by center hole.This product can take big axial load with high precision,and easy operation,spare time and strength reliable performance.2. Operation steps:A. Clean the taper hole of the tail-stock of the lathe and the shank of center,before putting the shank in the tail stock.B. Push the tail-stock to clamp the workpiece,if contacting well,lock the tail-stock,then ready for cutting.C. After finishing cutting,cut off the power,loosen the stock to load down the workpiece.3. Maintenance:A. Turn down the nut to grease the bearing by period.B. If long stored,cleaning ad covering it with oil.Products advantages1. Reliable seal design, can prevent dust and cooling liquid penetrate into the interior, head oil hole, the internal bearing oiling maintenance and bearing protection, improve service life.2. body material: 40Cr forging parts, heat treatment hardness HRC40-423. tip axis material: alloy tool steel, heat treatment hardness HRC58-60, with high rigidity and wear resistance.4. bearing selection: precision cylindrical roller bearings, needle roller bearings.
Other supplier products
|
|
BT30-FMA16 Face Milling Holder |
If you are looking for China, CNC lathe, milling bt30-fma16 face milling holder clamping tool holder, or precision spring bt30-fma16 face milling h... |
|
|
SK40-SEMC32 Combine Shell End Mill Arbor |
If you are looking for China, CNC lathe, milling sk40-semc32 combine shell end mill arbor clamping tool holder, or precision spring sk40-semc32 com... |
|
|
10MM Keyless Drill Chuck |
If you are looking for China, CNC lathe, milling keyless drill chuck 10mm keyless drill chuck clamping tool holder, or precision spring keyless dri... |
|
|
SK30-SLA6 Side Lock End Mill Holder |
If you are looking for China, CNC lathe, milling sk30-sla6 side lock end mill holder clamping tool holder, or precision spring sk30-sla6 side lock ... |
|
|
SK30-SEMC40 Combine Shell End Mill Arbor |
If you are looking for China, CNC lathe, milling sk30-semc40 combine shell end mill arbor clamping tool holder, or precision spring sk30-semc40 com... |
All supplier products
Same products
