TOYOTA KEY Maker for 4D chip
The operating step as follows: ( read the using step and the importance notice carefully)
1. Turn the ignition on with the right 4D chip key.
2. Connect the programmer to the OBD port of the car, there are some short beep sounds after power on. When the connection with the Computer of car is done successfully, there is a long beep sound in 3 seconds, and the “LED?is on, as well as the anti-light “SEC? which means the car is in the “key programming state?
3. Take away the programmer from OBD.
4. Matches 2 pcs main key and 1 pc vice-key to the IMMO computer
Notice: 2 new main key and 1 vice-key are needed to close the programming procedure?
a) Close all the car door.
b) Insert the first new main key to the ignition for 5 seconds.
c) Insert the other main key to the ignition for 5 seconds.
d) Insert the vice-key to the ignition for 5 seconds.
e) The new ignition key will be confirmed by the new IMMO.
Only program 1 or 3 main keys to the IMMO computer( Manual close the mode after complete the programming)
a) Close all the car doors.
b) Insert the new key for 5 seconds.
c) Insert another new key for 5 seconds.
d) Take out the key from ignition
e) Insert the first programmed main key, and turn on the ignition for 5 times quickly, then take it out.
f) The new ignition key will be confirmed by IMMO
Notice:
1. Must use the right Toyota 4D chip, otherwise you take the consequences.
2. Don’t try to open the cover of programmer and dash board
3. This machine is only provided for the legal auto repair.
Otherwise you will take the above consequences.
Other supplier products
|
T300 key programmer |
Used for programming of car keys. Models coverage: Acura, Audi, Alfa, Chevrolet, Citroen, Chrysler ( Dodge, Jeep), Daewoo, Ford Japan, Ford USA, F... |
|
X431 Heavy Duty |
Product description
Including all the advantages of its predecessor, X-431 Heavy Duty is designed to cover heavy duty diesel and gas-fueled vehic... |
|
SSS programmer with HP Computer V29 |
The SSSR3 is the new version of the Software Service Station .
SSS and SSSR2 which has been introduced in the authorised workshops of BMW AG worldw... |
|
FORD(FOCUS), MAZDA Keymaker |
Focus keymaker is very good device. It can make keys for Focus (from 2003 ) and RX8 of MAZDA.
Only this device, no PC. Make Focus`s keys via BDM o... |
|
Super VAG K+CAN |
As we know, there is very less diagnostic tool for VAG auto series, if we need to finish mixed, must need many diagnostic tool work together. Contr... |
All supplier products
Same products