Digital control mattress spring fatigue tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
The King Size Foam Fatigue Tester complies with or references the following standards:
ASTM D3574 – Dynamic Fatigue Test by Constant Force Pounding
ISO 2439 – Determination of indentation hardness and deflection
GB/T 26706 – General Technical Requirements for Mattresses (related clauses reference)
Parameters
| Parameter | Unit | Specification |
|---|---|---|
| Test Station | — | Single station |
| Applicable Mattress Size | — | King size, California King |
| Loading Method | — | Pneumatic |
| Loading Mode | — | Constant force / constant displacement |
| Maximum Test Frequency | cycles/min | ≤ 70 |
| Cylinder Stroke | in | 12 (customizable) |
| Indenter Diameter | mm | 250 |
| Load Measurement | — | Fatigue-rated load cell |
| Load Cell Capacity | lb | 500 |
| Positioning System | — | Manual X–Y gantry |
| Sample Retention | — | Four adjustable corner retainers |
| Control System | — | PLC with touchscreen interface |
| Air Supply Requirement | PSI | 80 |
| Power Supply | — | 120 VAC |
Features
Large test platform suitable for King and California King mattresses
Dual testing modes supporting constant force and constant displacement fatigue tests
Pneumatic loading system designed for high-cycle durability testing
Fatigue-rated load cell ensuring stable and repeatable dynamic load measurement
Manual X–Y gantry system allowing fatigue testing at any mattress location
Adjustable four-corner sample retainers for secure mattress positioning
High-frequency operation up to 70 cycles per minute to improve test efficiency
Touchscreen PLC control system for parameter setting, monitoring, and test control
Modular design supporting optional indenter sizes, stroke lengths, and load cell capacities
Accessories
Circular indenter, 250 mm diameter (ASTM D3574 compliant)
Pneumatic loading cylinder and air regulation components
Fatigue-rated load cell
Manual X–Y positioning gantry
Adjustable mattress corner retainers
PLC controller with touchscreen display
Compressed air connection components
Test Procedures
Place the mattress flat on the test platform
Adjust the four corner retainers to secure the mattress position
Select constant force or constant displacement test mode
Set test frequency, load or displacement value, and cycle count
Position the indenter using the X–Y gantry to the target test area
Start the fatigue test and allow the system to operate automatically
The system stops automatically upon reaching the preset cycle count
Remove the mattress after the indenter returns to the home position
Send product request
Other supplier products
 |
Plastic Smoke Density Tester F313，automotive interior smoke tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the spe... |
 |
Standard Smoke & Heat Detector Test Tunnel | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Smoke Fire Detector Threshold Test Chamber is a precision testing system ... |
 |
Plastic Pipe Burst Pressure Testing Machine ASTM D1598 | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ISO 1167: For thermoplastics pipe systems under constant internal ... |
 |
BBA steady state solar simulator tester for automotive materials | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The simulator complies with key international standards: (1) GB/T 6495.3 &ndash... |
 |
Deval abrasion testing machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction: Diphal abrasion testing machine is mainly used for stone abrasion ra... |
Same products
 |
Industrial automotive sunshade end cap assembly line supplier | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The assembly line is designed ... |
 |
High precision vehicle sunshade assembly machine | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The system is designed and man... |
 |
High precision control cable performance testing machine | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) Q/CT 29101-92 — Auto... |
 |
Industrial automotive & motorcycle cable fatigue tester supplier | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) QC/T 29101-92 — Auto... |
 |
Vehicle shock absorber jounce testing machine | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards QC/T 740-2017 – Automoti... |
