Stick-slip tribological test stand for material combinations G-H3P
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
(1) VDA 230-206 – German automotive friction noise standard.
(2) BMW PR315. BMW TL 9169300.
(3) VW / Audi / Porsche TL 52064. PV3981.
(4) Ford L400.
(5) TPJLR-00-230 – Jaguar Land Rover friction noise and friction performance standard.
Note: Standards cover automotive friction noise testing, friction force measurement, and environmental simulation requirements.
Parameters
| Parameter | Range / Specification | Description |
|---|---|---|
| Relative Speed (Linear Motor) | 1–150 mm/s | Simulates real friction speed |
| Stroke | 10–100 mm | Adjustable for different materials |
| Load Range | 2–80 N | Simulates different contact pressures |
| Temperature Range | -30℃ to 80℃ | Simulates environmental conditions |
| Static/Dynamic Friction Force | 0–35 N | Accurate measurement of friction forces |
| Maximum Acceleration | 0–25 g | Records stick-slip transition |
| Measurement Angle | 0–80° | Adapts to different material contact angles |
| Friction Frequency | 0–150 Hz | Simulates vibration frequency and friction state |
| Feed Mode | Force Control / Displacement Control | Programmable testing modes |
| Machine Dimensions | 250 × 250 mm | Compact lab tabletop design |
| Control System | PLC / PC | Real-time data acquisition and report generation |
Features
(1) High-precision measurement: combination of linear motor and force/acceleration sensors ensures accurate friction, acceleration, and pulse frequency measurement.
(2) Environmental simulation: testing under varying temperature, water, oil, and dust conditions.
(3) Quantifiable stick-slip noise: risk assessment (RPN) predicts potential squeak noise.
(4) Flexible testing: supports force control and displacement control modes to simulate diverse real-world scenarios.
(5) Data visualization: real-time curves and automatic report generation for R&D analysis.
(6) Compact and reliable: linear motor-driven structure, small footprint, low maintenance.
(7) Safety: optional protective enclosure prevents operator injury during testing.
Accessories
| Accessory | Specification | Function |
|---|---|---|
| Test Material Fixture | Adjustable | Secures sample, ensures stable friction testing |
| Friction Test Head | Metal or Rubber | Simulates fingertip, shoe sole, or component surface |
| Force Sensor | 0–80 N | Measures static and dynamic friction forces |
| Acceleration Sensor | 0–25 g | Records stick-slip acceleration variations |
| Temperature Control Plate | -30℃ to 80℃ | Simulates different environmental temperatures |
| Data Acquisition System | PC / PLC | Real-time collection of friction, acceleration, and pulse data |
| Software | RPN Calculation and Visualization | Risk assessment, pulse frequency analysis, reporting |
Test Procedures
(1) Prepare sample material and fix it on the test fixture, ensuring flat surface.
(2) Install and calibrate friction test head, force sensor, and acceleration sensor.
(3) Set test parameters: load, stroke, speed, temperature, and cycles.
(4) Start the test program, monitor real-time friction, acceleration, and pulse frequency.
(5) After testing, save data, generate curves, and perform RPN risk assessment report.
(6) Ensure safety: avoid operator contact with moving parts, use protective enclosure if necessary.
Maintenance Information
(1) Clean force, acceleration, and test head surfaces regularly.
(2) Calibrate sensors periodically to maintain accuracy.
(3) Inspect linear motor and fixture for mechanical wear.
(4) Verify environmental simulation equipment (temperature, water, dust) functions properly.
(5) Update software and check data acquisition system connectivity.
Send product request
Other supplier products
 |
Catheter Burst Pressure Tester | The Catheter Burst Pressure Tester uses the positive pressure method and is designed according to the relevant clauses of Appendix F of YY0285.1-20... |
 |
Material Fire Spread Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The Flame Spread Calorimeter is suitable for: Building materials: Evaluate fl... |
 |
Dry and Wet Retroreflectometer | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards EN ISO 20471:2013 ANSI/ISEA 107-2015 GB 20653-2006 GB/T 18833 Main uses Dry... |
 |
Helmet Xenon Aging Tester | The helmet xenon lamp aging tester is a device that simulates the damage caused by long-term exposure of helmets to ultraviolet radiation from sunl... |
 |
SUGA U48AU Carbon Arc Weathering Test Chamber | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications The SUGA U48AU Carbon Arc Weathering Test Chamber is a globally recognized in... |
Same products
 |
Industrial automotive sunshade end cap assembly line supplier | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The assembly line is designed ... |
 |
High precision vehicle sunshade assembly machine | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The system is designed and man... |
 |
High precision control cable performance testing machine | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) Q/CT 29101-92 — Auto... |
 |
Industrial automotive & motorcycle cable fatigue tester supplier | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) QC/T 29101-92 — Auto... |
 |
Vehicle shock absorber jounce testing machine | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards QC/T 740-2017 – Automoti... |
