.

Marine Supplies Standard Size Pneumatic Marine Rubber Fender For Boat Fender

What is marine rubber fender?

Fender which is made of synthetic-cord-reinforced rubber sheet with compressed air inside to enable it to float on the water and work as a shock absorber between two ships or between ships and berthing structures when they come alongside each other on the water.

Two types marine rubber fender

1)Sling-type fender:fender which is designed to be used without a protection net.
2)Net-type fender:fender which is covered by a protection net consisting of chain and with tyres or rubber sleeves.

Structure of marine rubber fender

1)Outer rubber layer
Rubber layer that covers the outside of the fender to protect the cord layers and the inner liner rubber from abrasion and other external forces.

2)Inner rubber layer
liner of a rubber membrane that seals the pressurized air inside the fender.(In general,we will make some inner rubber container in advance and inflate them.few days later,we will test the pressure again.The one which it's pressure did not change is good one.We will put it into store and when clients order we can use it directly.
This can ensure every fender we send to client is airtight one)
3)Synthetic-tyre-cord layer for reinforcement layer
layer made of synthetic-tyre-cord fabric which maintains the internal air pressure of the fender.
4)Flange opening
which is mounted on the fender to which an air valve can be adapted.(our flange are all embedded welding, very stable)
5)Initial internal pressure
Air pressure at which an uncompressed fender operates.

Marine rubber fender use matters needing attention

1 Pneumatic pressure control in±5% of the rated pressure
2 Test pressure normally, add pressure in a timely manner
3 Avoid contact with sharp objects
4 When Long time not need, should wash to dry, filled with right amount of compressed air, placed in a cool dryventilated place.
5 Storage place away from heat, acid and alkali, oil and grease
6 When store, shall not be folded and piled up

The purpose of marine rubber fender

1 Ship to ship berthing
Accompanied by a large ship, the risk of two ship berthing at sea is also increased, especially when the weather changes with wind and waves. Adopting pneumatic fender as the buffer can not only makes heavy berthing easy, but also improves the efficiency of the transportation operations. Pneumatic fender is mainly used for Ice in the Antarctic ocean fishing ships and large oil tanker berthing.
2 Used for terminal dock protection
Because of the large size of the ship, the berthing impact energy has multiplied.Inflatable rubber fender are widely used because of its high energy absorption and low reaction force features.

Application of marine rubber fender

Ship to ship transfers at seas.
Double banking operation as well as vessel to berth at dock/jetty.
Oil & gas tankers
Fast ferries & aluminum vessels
Temporary and permanent installations
Rapid response and emergencies
Liquid cargo and naval defense vessels



Send product request

To: Qingdao Florescence Rubber Products Co.,Ltd
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Dia0.5m L1.0m different colors foam filled fender for ship to ship
Dia0.5m L1.0m different colors foam filled fender for ship to ship Dia0.5m L1.0m different colors foam filled fender for ship to ship Foam filled fender is a kind of constructive fender with polyurea m...
Launching lifting ship and marine airbag
Launching lifting ship and marine airbag Marine airbag Ship and marine airbag Ship and marine airbag is well known as ship launching airbag,marine airbag,rubber airbag,la...
Ship operation for dock berthing and mooring
Ship operation for dock berthing and mooring Ship operation for dock berthing and mooring Marine floating fender which is made of synthetic-cord-reinforced rubber sheet with compressed ...
Dia1.5m L3.0m 50KPA marine rubber fender for STS service
Dia1.5m L3.0m 50KPA marine rubber fender for STS service 1.What is marine rubber fender? Fender which is made of synthetic-cord-reinforced rubber sheet with compressed air inside to...
Dia3.3m L6.5m BV certificated ship to ship marine pneumatic fender
Dia3.3m L6.5m BV certificated ship to ship marine pneumatic fender Dia3.3m L6.5m BV certificated ship to ship marine pneumatic fender Size Diameter from 0.3-4.5m, Length from 0.6-12m ...
All supplier products

Same products

Marine delivery valve18/22 (10mm)  G60 (14mm) G60,6CRN 36/45
Marine delivery valve18/22 (10mm) G60 (14mm) G60,6CRN 36/45 Seller: Sihong Tangni Engine Parts Co., Ltd. Our factory sell marine nozzle, plunger,injector,valve,etc,which used for the vessel and agricult...
Marine plunger NVD26  (16mm) L.R 36/24  (20mm)
Marine plunger NVD26 (16mm) L.R 36/24 (20mm) Seller: Sihong Tangni Engine Parts Co., Ltd. Our factory sell marine nozzle, plunger,injector,valve,etc,which used for the vessel and agricult...
Marine nozzle ×0.3×130,5×0.35×130,5×0.5×140,5×0.75×140,6×0.3×130
Marine nozzle ×0.3×130,5×0.35×130,5×0.5×140,5×0.75×140,6×0.3×130 Seller: Sihong Tangni Engine Parts Co., Ltd. Our factory sell marine nozzle, plunger,injector,valve,etc,which used for the vessel and agricult...
Marine nozzle5×0.35×130   6×0.3×130
Marine nozzle5×0.35×130 6×0.3×130 Seller: Sihong Tangni Engine Parts Co., Ltd. 5×0.3×130 SUIT ENGINE: NVD-26-A3 5×0.35×130 SUIT ENGINE: NVD-26-A 5×...
BV certificated cylindrical pneumatic floating fender for dock
BV certificated cylindrical pneumatic floating fender for dock Seller: Qingdao Florescence Rubber Products Co.,Ltd BV certificated cylindrical pneumatic floating fender for dock ♦ Qingdao Florescence...