TTF tensile testing machine
Product Introduction:
The TTF tensile testing machine is designed to provide high and stable tensile forces in tensile tests. Mostly for toys
Destructive tension test; The cylinder provides power; The clamp of the specimen can be adjusted to any suitable position.
Parameter theoretical maximum push/pull 188/168 Kgf
Maximum travel 150 mm
Speed 50-800 mm/s
Volume 1620×320×421 mm
It weighs about 81kg
1. TTF test method:
Applicable: All McDonald's products required for TTF testing.
2. Purpose:
Collect and analyze data to assess process capability and deviation of the production process to further
To evaluate the safety and reliability of the product.
equipment
3.1TTF test machine
4. Test conditions:
4.1 Room temperature: 23±2℃， humidity 20% —— 70%.
4.2TTF test machine travel speed: 0.7±0.1in/sec.
4.3TTF test engine air pressure: 60±10psi （4.2±0.7kgf/cm）
5 TTF test operation procedure:
5.1 Check/adjust the test environment to meet the requirements （room temperature: 23±2℃; Humidity 20% —— 70%）。
5.2 Check whether all components on the TTF machine are in good condition and connected/secured.
5.3 Open the air pressure pump and adjust the air pressure valve of the air pressure pump to make the air pressure of the air pressure pump meet the requirements （60±10psi）。
5.4 Adjust the pressure valve of TTF machine to make the pressure reach the requirement （60±10psi）。
5.5 Start the TTF machine and check whether the TTF machine is normal （such as whether the taxi is smooth, etc.）。
5.6 Install the tension pound and adjust the intake valve on the pneumatic machine of the TTF machine to make its travel speed reach the requirement （0.7±0.1in/sec）。
5.7 Position adjustment of TTF machine.
5.8 After alignment adjustment, secure the position.
5.9 Test fixture specified in the force bitmap /TTF test demonstration diagram.
5.10 The sample process must be placed in the required environment （room temperature 23±2℃， humidity 20% —— 70%） for 4 hours before it can be carried out.
5.11 Performing a Test.
5.12 Record the test result After the Test.
Send product request
Other supplier products
 |
Protective Clothing Thermal Conductivity Tester | The protective clothing thermal conductivity tester is a professional equipment specially used to detect the heat transfer characteristics of prote... |
 |
AKRON abrasion testing machine | Product Introduction: AKRON wear testing machine is used with the balance, specially testing the wear resistance of rubber products such as soles,... |
 |
Zipper Reciprocating Tester | IntroductionZipper reciprocating tester is used to measure the zipper performance of products with zippers, such as clothes, textiles, auxiliary ma... |
|
|
TTF tensile testing machine | Product Introduction: The TTF tensile testing machine is designed to provide high and stable tensile forces in tensile tests. Mostly for toys Des... |
 |
Taber Linear Abraser | TheTABER Linear Abraser (Abrader) - Model 5750has been engineered to evaluate product’s abrasion resistance, scratch resistance (single or mu... |
Same products
 |
Cold Glaze Stabilizer (Glazemate) | Seller: Marine Hydrocolloids | Meron’s Cold Glaze Stabilizer Glazemate, a ready to use Neutral Cold Glaze Stabiliser, whic... |
 |
Pectin | Seller: Marine Hydrocolloids | Meron Pectin is a structural polysaccharide of the cell wall of plants, Commercial pectin is comm... |
 |
Milk Shake Stabilizer | Seller: Marine Hydrocolloids | Meron’s Milk Shake StabilizerOur Milkshake Stabilizer has been designed to provide creamy m... |
 |
Flavoured Milk Stabilizer | Seller: Marine Hydrocolloids | Meron’s Flavoured Milk StabilizerFlavoured milk drinks are sweetened dairy drinks, typicall... |
 |
Ice Cream Stabilizer | Seller: Marine Hydrocolloids | Meron’s IceCream Stabilizer is a 100% vegan blend developed to not only enhance the texture... |
