High precision tungsten carbide guide wheel guide roller

• 
• 
• 
• 

1. For the rolling mill, guide rollers (also called ring rollers, guide wheel) is an indispensable part of wires export in the wires rolling process, it must be accorded with the requirements of high rigidity, good wear resistance (the service life is matched with the high-quality bearing), good thermal conductivity, a certain of red hardness, especially the high speed wires rolling (rolling speed is among 80-120m/s). In the current market, most of the guide wheels are manufactured by steel materials (especially in the domestic market), which have the weak wear resistance, short service life and high frequency replacement, so the scale benefit of wire materials is restricted. however, steel-bonded cemented carbide has the obvious strengths on this aspect.
   
   

   Lighter than Tungsten carbide roller by 55%, Lighter than tool steel than 20%, so the guide roller accelerates from standstill to 35,000 rpm, without damaging the bearing.Very low coefficient of friction and self-lubricating properties, so the working portion of the guide roller is less worn, and the production can be greatly increasedThe coefficient of thermal expansion is close to that of the bearing steel. When the quenching is hot, the bearing will not get stuck. The thermal expansion coefficients of titanium carbide cemented carbide and tungsten carbide hard alloy are very different from those of steel. Therefore, the steel bonded carbide guide roller is more advantageous for bearing anti-seize ability than the two cemented carbide guide rolls.The micro structure is titanium carbide and high chromium tool steel, which has good thermal fatigue resistance.Anti-oxidation, less magnetic, non-stick steel.Annealing hardness is only HRC45-48, easy to process, after quenching, only alittle fine grinding can be processed into finished products, the processing cost is low, so the price is also low. this is also one of the main reasons why titanium carbide guide rolls are superior to tungsten carbide guide rollers.Hardness HRC62-67, good wear resistance. the service life is 8-10 times that of high speed steel.Absolutely dense, the pores are almost zero, so it will not break when used and can be reused.Compared with similar foreign products, the price of Miller MT10 is lower, which greatly saves the production cost of customers.

Other supplier products

	Titanium carbide rods - special for metal cutting	Titanium carbide round rods made of cemented carbide are high-performance components fabricated through a powder metallurgy process, with titanium ...
	Titanium carbide guide wheel - wear-resistant and durable	The working temperature range of hard alloy titanium carbide guide wheels is wide, and their performance is stable in an environment from -100℃ to ...
	Customizable carbide guide wheel & roller	Guide wheels, also known as guide rolls or guide wheels, are an important part of bar and wire rod rolling equipment in the iron and steel indust...
	Titanium carbide powder with good dispersibility	Titanium carbide powder has excellent oxidation resistance. It is not prone to oxidation in the air below 600℃, and the oxidation rate at 800℃ is o...
	High-density titanium carbide rods are preferred for stamping dies	Compared with traditional high-speed steel bars, the cutting speed of hard alloy titanium carbide round bars can be increased by 3 to 5 times, and ...

Same products

	Petroleum Valve Casting CoreTech Series	Seller: Qingtian Baoli Casting Co., Ltd.	Petroleum Valve Casting CoreTech Seriesoffers a steady foundation for producing valves used in fl...
	Bathroom Bi-stable Sensor Faucet Solenoid Valve	Seller: Zhejiang Fuxin Electrical Technology Co., Ltd.	The Bathroom Bi-stable Sensor Faucet Solenoid Valve is designed for use in sensor-controlled syst...
	Wear-resistant carbide guide wheel guide roller	Seller: Zhuzhou Hastion High-Tech Materials Co.,Ltd.	For the rolling mill, guide rollers (also called ring rollers, guide wheel) is an indispensable p...
	High precision tungsten carbide guide wheel guide roller	Seller: Zhuzhou Hastion High-Tech Materials Co.,Ltd.	For the rolling mill, guide rollers (also called ring rollers, guide wheel) is an indispensable...
	Portable Wooden Sleeper Drilling Machine	Seller: Wuhan Linkage Track Equipment Co., Ltd