.

Single Stage Hot Coal Gas Gasifier

Single stage hot gas station Φ1.5 m ~Φ4.0 m single stage coal gasifierSINGLE—;STAGE COAL GASIFIER TECHNICAL PARAMETERspecificationparameter itemspecification of coal-gasifierφ1.5Mφ2.0Mφ2.4Mφ2.6Mφ3.0Mφ3.2MGasifier bodyDia.of chamber(mmChamber cross-section area(m2)1.7673.1424.5245.3097.0688.042fuelMax coal consumption(kg/h)speciesAccording to GB9143-88 standard;Anthracite、Non-caking coal、Lignite、Coking coalCoal particle size(mm)13~25,Website:~50 GasTheory output(Nm3/h)1150~17502000~31503000~50004900~70004900~70005900~8000Heating value range(KJ/Nm3)5230~6060basic ingredient(%)CO:≥25;H2:12~18;CH4:1~3;N2: 45~50;O2:0~0.4;CO2: 4~8functionintensify of gasification(kg/m2h)anthracite:≈200 soft coal:≈300  coke:≈180rate of gasification(Nm3/kg)anthracite:3.0~3.5  soft coal:3.0~3.5  coke:≈4.0diameter of steam pocket * length(mm)φ600×;1500φ800×;1650φ1000×;2200Technological processDrum air blower of air and the occurrence of a furnace body water clip 0.294mpa set of self-produced steam by the control valve, setting the ratio of mixed regulation merged into saturated air (gasifying agent), through the check valve into the furnace. In the furnace after at the bottom of the gas furnace grate uniform wind, the ash heat heating of the reverse downward into the fire gasification layer (1000 to 1200 DEG C) and hot carbon gasification reaction occurs, the heat of formation crude gas to new furnace coal drying and from the gas occurrence furnace outlet is derived, the exit gas temperature ranging from 500 to 600 DEG C, the main component for CO, H2, CO2, N2. Where CO and H2 are the active components of the gas, which belong to the heating gas, N2 is the air component of the gasification agent. Gasifier bed height is 1.3m ~ 1.8m, from top to bottom can be divided into ash layer, gasification layer, reaction layer, dry distillation layer. Into the furnace of coal after crushing, screening, size 13 ~ 25mm, 25 to 50, or 40 ~ 60mm, through the skew bridge by coal hoisting device added to double bell cover coalbox. The coal distributor into the furnace.Purification treatmentBy the gas occurrence furnace production of crude and hot gas (temperature of 500 to 600 DEG C) first by gravity dust collector, the large particle dust in the gas by weight part fall into the bottom tube, and then entered with the water seal isolation of cyclone further dust, the secondary dust removing gas by coal gas pipeline transported to gas.Single stage hot gas station process flow diagram 


Send product request

To: ZiBo YiFeng Mechanical engineering co.,LTD
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Gas Storage Tank
Gas Storage Tank  Gas storage tank500 m3 ~ 10000 m3 series gas storage tank,Website:, Play important role in supply gas smoothly and adjust the gas consumption Gas ...
Single Stage Cold Coal Gas Gasifier
Single Stage Cold Coal Gas Gasifier  Single stage cold gas stationTechnological processThe air blower of drum boiler water clip 0.26mpa set of self-produced steam by the control valve...
Single Stage Hot Coal Gas Gasifier
Single Stage Hot Coal Gas Gasifier Single stage hot gas station Φ1.5 m ~Φ4.0 m single stage coal gasifierSINGLE—;STAGE COAL GASIFIER TECHNICAL PARAMETERspecificationparameter itemspe...
Two Stages Hot Coal Gas Gasifier
Two Stages Hot Coal Gas Gasifier Two stages hot gas stationΦ2.0m~Φ4.5m Two stages hot gas station,Website: gas flows in high temperature,more high thermal efficiency,more less phen...
All supplier products

Same products

Custom Made Precision CNC Stainless Steel Turning Parts with Laser Marking
Custom Made Precision CNC Stainless Steel Turning Parts with Laser Marking Seller: Dongguan Weimi Hardware Technology Co. Ltd. Dongguan Weimi Hardware Technology Co.,Ltd is one of the leading China turning stainless steel ma...
High USA precision parts/ turning aluminum parts/ cnc turning center parts
High USA precision parts/ turning aluminum parts/ cnc turning center parts Seller: Dongguan Weimi Hardware Technology Co. Ltd. Dongguan Weimi Hardware Technology Co.,Ltd is one of the leading China aluminium turning parts ma...
Custom precision steel CNC milling parts
Custom precision steel CNC milling parts Seller: Dongguan Weimi Hardware Technology Co. Ltd. Weimi Hardware Tech. Company is one of the leading China custom precision steel cnc milling parts...
High Precision CNC Turned Metal Parts for Medical Devices
High Precision CNC Turned Metal Parts for Medical Devices Seller: Dongguan Weimi Hardware Technology Co. Ltd. Dongguan Weimi Hardware Technology Co.,Ltd is one of the leading China turned metal parts manufac...
Precision CNC turning machinery Brass Turned Parts Components
Precision CNC turning machinery Brass Turned Parts Components Seller: Dongguan Weimi Hardware Technology Co. Ltd. Dongguan Weimi Hardware Technology Co.,Ltd is one of the leading China brass component manufactur...