rtv2 liquid platinum cure silicone rubber molding high quality cheap price
rtv2 liquid platinum cure silicone rubber molding high quality cheap price
Description
Two-component silicone,platinum-curing/ addition-cure type, flowable, vulcanizes at room temperatureor heated temperature.
Can be used for a long time in the temperature range of - 65 ° C - 200 ° C and keep its soft and elastic properties.
Application
- Suitable for molding variety of products in large quantity, such us art crafts, furniture, architectural elements, garden ornaments, shoe, tire, soap, candle, vacuum bagging, wind turbine blades, ship/boat hulls, aircraft hulls, FRP pipes/profiles, beacon lighthouse covers, military industry, aviation and other fields etc.
- Suitable for materials such as resin, PU, PVC, polyester, gypsum/plaster, wax etc.
Features& Advantages
²Food grade, FDA
²Low shrinkage
²Low viscosity
²Anti-deformation
²High temperature resistance
²Not oily
²No bubbles
²Excellent flow levelingwhich will copy finest details and patterns from exquisite products.
²Durable with excellent tear and tensile strength, guarantee molding times
²Easily demolding
²Resist aging, acid,alkali,corrosionand weather aging
Typical propertiesINI-E620
|
PropertiesIndex |
Test Report |
|
|
Before Curing |
Appearance |
Translucentfluid |
|
Viscosity（cps） |
3800±1000 (Adjustable) |
|
|
Operating |
Mixing Ratio （By weight） |
1：1 |
|
Operating Time（25℃/min） |
30～40 (Adjustable) |
|
|
Curing time（hr,basically cured） |
3~5 (Adjustable) |
|
|
Curing time（hr, perfectly cured） |
12 |
|
|
After Curing |
Hardness (shore A) |
20±2 |
|
Tear strength (kN/m) |
25±4 |
|
|
Tensile strength (Mpa) |
6.5±1 |
|
|
Shrinkage (%) |
≤0.1 |
|
|
Elongation (%) |
410~560 |
|
|
Density (g/cm) |
1.02 |
|
Operation instructions
1.Mix part A and pars B evenly with 1:1 mixing ratio.
Notes: 1) Weigh the two parts exactly by electronic weight. For example, the operation time will be shorten after adding too much catalyst.
2)Mix part A and part B evenly. Otherwise the silicon rubber will be partly solidified which will make the finished molds meet a short life and waste silicon rubber.
2.Vacuum pumping
Notes: 1) This step is not have to have, but it is best if there is one. It will discharge all air in the mixture successfully, so as to ensure that therewill be no bubbles in the finished mold.
2) This step is less than 10 minutes. Otherwise, itWill cause cross-linking reaction, and no morefurther steps will be available.
- Pouring casting
Notes: We suggest to set the mold for another 12 hours after demould before put it into large production.
Package
5KG, 20KG, 25KG and 200KG per drum.
(There are metal drum and plastic drum for your choice for 5KG and 20KG)
Shelf life
Twelve(12) months when stored under dry and cool place by original package under 25℃.
WhyChooseus
1.Powerfulfactorywithaproductioncapacityof8000perday, we are the more than 10 years factory in China, with excellent and stable quality.
2.High-endresearchanddevelopment(freesample)
BeingaleadingliquidsiliconemanufacturerinChina,wehaveaprofessionalR&DteamandQCteam(12experts)andourproductisRoHS,MSDS,ISO,REACH,ULapproved,sothereisnoneedtoworryaboutthequality.
3,Efficientservice
Wecanprovidefreetrainingofsiliconetechniqueandfreesiliconesamples.wehaveaprofessionalsalesteamwhowillsolveyourproblemspatiently.Besides,withefficientlogisticsdistributionsystem,youcouldgetyougoodsearlier.Last,goodaftersalesservice,webuildlongtermcooperationrelationship,oncethereisqualityproblem,wecouldsolverightaway.Moreimportantly,returnandexchangeareacceptedwhilequalityproblemsoccurred.
We can provide the free sample, more details about silicone rubber, pls contact Ms Lisa at:
Mobile/ Whatsapp/: +86 188 1670 2967
2967or A108059
E-mail:lisasilicone(at)
Twitter/Facebook:lisasilicone
Send product request
Other supplier products
 |
two parts tin cure silicone rubber for mold free sample | 1. Description Two-component silicone, tin-curing, flowable, vulcanizes at room temperature. Can be used for a long time in the temperature range... |
 |
clear platinum cure silicone rubber jewelry molding high quality free sample | clear platinum cure silicone rubber jewelry molding high quality free sample Description High transparency, two-component silicone,platinum-curin... |
 |
softest platinum silicone rubber hepa air filter high quality clear silicon gel | softest platinum silicone rubber hepa air filter high quality clear silicone gel Description Two-component silicone,platinum-curing/ addition-cu... |
 |
platinum cure silicone rubber prosthesis hands foot ear product liquid silicone | platinum cure silicone rubber prosthesis hands foot ear product liquid silicone Description Two-component silicone,platinum-curing/ addition-cur... |
 |
UL 94 V0 grade silicone encapsulating potting compound sensors led pcb | UL 94 V0 grade silicone encapsulating potting compound sensors led pcb Description Two-component silicone,platinum-curing/ addition-cure type, f... |
Same products
 |
Easy-cleaning Silicone-Modified Waterborne UV Resin | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | LUV533 is a high-performance, silicone-modified hexafunctional waterborne UV resinengineered to d... |
 |
Water-based Soft-Touch Resin for Consumer Electronics | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | Water-based Soft-Touch Resinis an advanced coating material formulated to deliver a luxurious, ve... |
 |
Conformal Coatings | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | The conformal coatingsprovide good adhesion to metal, PCB and other substrates after curing at ro... |
 |
Metalized & Laser Transfer coating | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | Metallized and laser transfer coatingsare designed with sustainability in mind, ensuring minimal ... |
 |
Hydrophilic coatings for Air Conditioner | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | A water-based coating combination applied on the surface of aluminum foil, which forms a layer wi... |
