TMQ(RD) CAS 26780-96-1 poly(1,2-dihydro-2,2,4-trimethyl-quinoline)
Introduction
Chemical Name:Polymer of 2,2,4-trimethyl-1,2-dihydroquinoline
CAS NO.:26780-96-1
Product Specification:
| Appearance | Amber to Brown Pastilles | |
| Total content of dimer, trimerand tetramer(HPLC),% |
≥ | 50.0 |
| Isopropyl bis aniline content(HPLC),% | ≤ | 0.50 |
| Softening Point,°C | 80.0-100.0 | |
| Ash,% | ≤ | 0.30 |
| Heat Loss(50-55°C ),% | ≤ | 0.30 |
| Insoluble in ethanol,% | ≤ | 0.20 |
◆Performance:
-TMQ is a general quinoline antioxidant with excellent heat and oxidative aging resistance performance in the rubber industry;
-TMQ has strong heat, oxidation and aging resistance performance;
-TMQ has low volatility and low pollution in vulcanized rubber products.
◆Application:
-TMQ is widely used in all kinds of tires, rubber tubes, rubber belts, rubber shoes, rubber cloth products and other general industrial rubber products, and can also be used for latex products.
◆Packaging:Paper/plastic packages with a net weight of 25kg per package.
◆Transportation Condition:Clear vehicle with ceiling, avoiding sunshine and rain, keeping away from hot source.
26780-96-1 –Physico-chemical Properties
| Molecular Formula | C12H15N |
| Molar Mass | 173.25 |
| Density | 1.08 |
| Melting Point | 72-94°C |
| Boling Point | >315°C |
| Flash Point | 158.8°C |
| Water Solubility | <0.1 g/100 mL at 23 ºC |
| Solubility | <0.1 g/100 mL at 23°C |
| Vapor Presure | 0Pa at 25℃ |
| Appearance | Yellow |
| Storage Condition | 2-8°C(protect from light) |
| Refractive Index | 1.4870 (estimate) |
| Physical and Chemical Properties | Density 1.08 melting point 72-94°C boiling point> 315°C water solubility <0.1g/100 mL at 23°C |
| Use | Mainly used as rubber antioxidant, suitable for natural rubber and nitrile, styrene, Ethylene Propylene and chloroprene and other synthetic rubber |
Send product request
Other supplier products
 |
MS modified silane sealant | Introduction Modified silane sealant, environmentally friendly, has a wide range of adhesive properties, no need for primer, UV protection, no sol... |
 |
Industrial formaldehyde | Introduction Formaldehyde, chemical formula or HCHO or CH2O, formula 30.03, also known as ant aldehyde, explosion limit: 7.0-73%. It has a strong ... |
 |
CAS 1823-59-2 | Introduction 4.4 ‘-oxybis-phthalic anhydride is a white to white powder organic substance that can be used to make polyimide resins. Applic... |
 |
Substrate wetting additive STD-249 | Composition: Polyether modified silicone oil Appearance: light yellow viscous liquid Active ingredient: 100% Solvent: NoneScope of Application: ... |
 |
UV Light Curing Adhesive | Introduction UV curable adhesive is a structural bonding adhesive that solidifies by irradiating UV light. The characteristic of UV curable adhes... |
Same products
 |
Epoxy/Polyester Powder Coatings | Seller: Standard International Group (HK) Limited | Feature: -Good bond ability and mechanical performance -Smooth and glossy -Certified chemical ... |
 |
Polyester Clear Powder Coatings | Seller: Standard International Group (HK) Limited | This series of product are made of polyester resin (as hardener) and highly transparentmaterials.... |
 |
Acrylic Clear Powder Coatings | Seller: Standard International Group (HK) Limited | Feature: -Excellent exterior exposure durability -Excellent durable high gloss -Excellent clar... |
 |
Polyurethane Powder Coatings | Seller: Standard International Group (HK) Limited | Feature： -Excellent exterior exposure durability -Good flowing -Excellent chemical resistance ... |
 |
MDF Powder Coating | Seller: Standard International Group (HK) Limited | Feature： -Environmental friendly -No solvents and volatile organic compounds involved which are... |
