Portable Hand-held UV Light
Portable hand-held uv light instructionsA: the scope of application:1: can be used for floor paint curing, model making, arts and crafts
forming, scientific experiments, etc.2: special UV curing molding, model making, arts and crafts.3: suitable for furniture, floor surface polishing, such as artificial
stone (marble surface glazing toughened) site construction, etc.4: suitable for UV glue (UV glue crystal, electronic UV glue, UV shadowless
glue, UV potting glue, etc.), rapid curing, laboratory and temporary
construction simple maintenance Can be used with conveyor belt form a complete
set of 5: suitable for UV ink, ink, such as UV light oil coating experimental
small batch production 6: car large area of UV paint, UV light oil curing, small
area repair, interior decoration, etc.7: paint ageing test, the test of all kinds of scientific experiments.Features:1. This uv light usage convenience, adopt fission type
structure, simple operation, easy to use (include power box and lamp box two
parts), can be arbitrary fixed, curing from multiple perspectives.2: work power AC220v 50 hz, power saving less noise.3: using small axial
flow fan air cooling on the tubes. Light box power box connection wire length
about: 3 m, input about the power cord length: 1.6 m.4: the uv light is equipped with automatic air switch, use safety.5: reflective aluminum radiator outside lampshade and imported mirror
reflective aluminum sheet, the largest UV light refraction, strengthening drying
curing effect.Method of use:1: close the power box behind the total power switch, power indicator light
is lit, the machine is in standby mode. 2: after turning on the power supply,
open the lamp switch after waiting for about 1 minute) after (current meter from
high to low and stable, start work lamp cooling switch.3: turn off the light
switch delay after work has stopped 5-10 minutes of light restarted after
cooling.4: start the uv lamp, immediately after turn off the lights don't light is
a normal phenomenon, after uv lamp cooling can light up. (low winter
temperatures indoors best start, low environmental temperature also affect the
tubes).Matters attention1: the staff must be equipped with special uv protection glasses, must wear
long sleeve clothes, to go the rubber gloves, forbid ultraviolet light
irradiation directly to the skin.2: natural ventilation requirements work environment. 3: such as indoor work must assemble ventilator, ensure indoor air flow good.4: check whether earth wire grounding.5: when the fan is not normal, do not use, so as to avoid burning lamp.6: when changing a tube, don't touch the lamp with the hand, cause a mole,
on the lamp in case influence the luminous efficiency, must wear clean gloves
for installation.7: pay attention to maintenance the tubes, wipe on a regular basis (keep
the tube surface clean), rotate 180 degrees on a regular basis, in order to
guarantee the life of the tube well.Technical parametersIrradiation distance: 80-200 - mm cooling: air cooling exhaustPower density: 80-120 - w/cm brightness range value: 1000-9500 ㎡ MMJ/CSpectrum peaks: 365 nm electric source: AC220V, 50 to 60 hzLamp tube, high pressure mercury lampModel selection 150 watts - 3 kwLamp irradiation range power supply1 kw 150 mm (tube length: 23 cm) 220 v, 50 hz2 kw 250 mm (tube length: 40 cm) 220 v / 380 v, 50 hz3 kw 350 mm (tube length: 50 centimeters) 220 v / 380 v, 50 hz500 w to 75 mm (tube length: 17 cm) 220 v, 50 hz(power box shell note grounding line)According to the customer's requirements Other models can be customizedThe instantaneous drying, high-tech environmentally friendly products
Other supplier products
|
|
|
Hengyi Automation Equipment Co.,Ltd is a professional auto spray painting equipment, automatic spray painting equipment, automatic paint spraying e... |
|
|
|
Recycling Paint spray booth environmental friendlyThere is recycling function for UV paint, recycling rate reach to 40%, no exhaust air and it is ... |
|
|
|
Hengyi Automation Equipment Co.,Ltd is a professional double air shower unit, double clean room equipment, double air shower, double air shower cle... |
|
|
|
Hengyi Automation Equipment Co.,Ltd is a professional evaporated vacuum coating machine, evaporated vacuum coating machine, evaporated vacuum coati... |
|
|
|
Hengyi Automation Equipment Co.,Ltd is a professional big flow ultra pure water equipment manufacturer, factory, plant and supplier, we are always ... |
供应产品
Same products
