1.0-7.0 W/m·K silicone Thermal putty for heat sink computer services
供应产品
Product Features
Bornsun's BN-PN series (thermal putty) are mud-like thermal materials whose form is between thermal pad and thermal grease.
Thermal putty could be shaped into required thickness and size by hand or mold. It could be still soft and deformable after using. BN-PN series thermal putty will not get cured which meets your demands of reapplying and repair of components.
In conjunction with outstanding compression characteristics (up to 80%), thermal Putty BN-PN series has a high thermal conductivity that results in very low thermal resistance. It’s naturally adhesive and requires no further adhesive coating which allows it to be applied at various complicated circumstances.
Thermal putty is electrically insulating and is stable from -60°C to 200°C.
ROHS Compliant: Yes
Features
Thermal conductivity: 1.0-7.0 W/m·K
Excellent thermal performance
Low thermal resistance
Non-toxic, non-corrosive
Electrically insulating
Excellent deformability
Application
LED
Uneven surface components
Between semiconductor and heat sinks
Electronics
Packaging Description
BN-PN series(thermal putty) is available in:
Cans （1Kg，2Kg）
Buckets （10Kg，20Kg）
在线联系供应商
Other supplier products
 |
High performance Flame retardant silicone product and rubber sheet | Flame Resistant Products BN-400 is made from excellent performance silicone and fire retardant. It has approval UL certificate ■Benefits and feat... |
 |
Electric waterproof two-component Silicone encapsulant for sealing pcb | RoHs Compliance: Yes Features： Room temperature cure or rapid hot cure. Addition cure, no byproduct, Low shrinkage. Excellent thermal conductive ... |
 |
hot-pressing and injecting silicone headphone rubber cover | It's adopts high performance silicon rubber as the raw material,it's adopting hot-pressing and injection method molding, meanwhile it can provide c... |
 |
hot-pressing and injecting Silicone automotive seal ring | The seal ring should have good sealing performance in the working pressure and certain temperature range, and the sealing performance will be impro... |
 |
Hot-pressing and injecting Kitchen silicone rubber product | This product adopts high performance silicon rubber as the raw material, adopting injection molding process. Features and Benefits: Excellent trans... |
Same products
 |
H4 insulation pressboard | 卖方: Huisheng Group co., Ltd. | Made by 100% sulphate coniferous wood pulp, with high mechanical and electrical strength, high te... |
 |
BW Series-Brackish Water RO Membranes UC BW-4040-82 | 卖方: UltraClean Membrane CO., Ltd | BW RO membrane elementsare mainly used for brackish water desalination. They provide excellent, s... |
 |
SW Series -Seawater Desalination RO Membranes UC SW-8040-400HR | 卖方: UltraClean Membrane CO., Ltd | UltraClean SW series are high-end RO membranes featuring a supporting layer with high compression... |
 |
SW Series -Seawater Desalination RO Membranes UC SW-8040-365HRLE/34 | 卖方: UltraClean Membrane CO., Ltd | UltraClean SW series are high-end RO membranesfeaturing a supporting layer with high compression ... |
 |
青稞纸电绝缘纸0.125mmQKZ-0125 | 卖方: 深圳市丹美森实业有限公司 | 序列号 指定 物业单位 单位指标值 价值观 1 标称厚度 公称厚度 mm 0.1 0.125 0.15 0.18 0.20 0.25 0.30 0.40 0.50 2 厚度公差 厚度允许公差 m... |
