SW Series -Seawater Desalination RO Membranes UC SW-8040-400HR
UltraClean SW series are high-end RO membranes featuring a supporting layer with high compression resistance, thick and dense flawless thin film layer. It has good wear and chemical degradation resistance.
The membrane element does not need postprocessing during the manufacturing. It tolerates a wide range of pH, which enables more efficient and rougher cleaning using regular acid and base, therefore it has high cleaning efficiency. The membrane system can operate in long term under lower pressure due to thorough cleaning, therefore the membrane performs better during its service life. It can significantly reduce operation costs, and bring the best long-term economy to the seawater desalination system.
Seawater Desalination RO MembranesFeatures
Advanced membrane technology with innovative thin layer composite membrane design.
More consistent performance with less fouling requiring less frequent cleaning and change-outs.
100% dry-stored membrane maximizing shelf life.
Products Highlight
High rejection rate of salts
High compression and fouling resistance and high cleaning efficiency
Cost-saving of seawater desalination system
Notes
Permeate flow for individual elements may vary ±15 percent from the value specifed.
Active membrane area guaranteed ±4%.
Stabilized salt rejection is generally achieved within 24-48 hours of continuous use; depending upon feedwater characteristics and operating conditions.
General Information
The first full tank of permeate should be discarded, DO NOT use this initial permeate for drinking water or food preparation.
Keep membrane moist at all times after initial wetting.
To stop growth during prolonged system shutdowns, it is recommended that membrane elements be immersed in a preservative solution.
在线联系供应商
Other supplier products
SW Series -Seawater Desalination RO Membranes UC SW-8040-365HRLE/34 | UltraClean SW series are high-end RO membranesfeaturing a supporting layer with high compression resistance, thick and dense flawless thin film lay... | |
SW Series -Seawater Desalination RO Membranes UC SW-8040-400HR | UltraClean SW series are high-end RO membranes featuring a supporting layer with high compression resistance, thick and dense flawless thin film la... | |
BW Series-Brackish Water RO Membranes UC BW-8040-400FR/34 | BW RO membrane elements are mainly used for brackish water desalination. They provide excellent, stable and consistent membrane performance for ind... | |
BW Series-Brackish Water RO Membranes UC BW-4040-82 | BW RO membrane elementsare mainly used for brackish water desalination. They provide excellent, stable and consistent membrane performance for indu... |
Same products
H4 insulation pressboard | 卖方: Huisheng Group co., Ltd. | Made by 100% sulphate coniferous wood pulp, with high mechanical and electrical strength, high te... | |
BW Series-Brackish Water RO Membranes UC BW-4040-82 | 卖方: UltraClean Membrane CO., Ltd | BW RO membrane elementsare mainly used for brackish water desalination. They provide excellent, s... | |
SW Series -Seawater Desalination RO Membranes UC SW-8040-400HR | 卖方: UltraClean Membrane CO., Ltd | UltraClean SW series are high-end RO membranes featuring a supporting layer with high compression... | |
SW Series -Seawater Desalination RO Membranes UC SW-8040-365HRLE/34 | 卖方: UltraClean Membrane CO., Ltd | UltraClean SW series are high-end RO membranesfeaturing a supporting layer with high compression ... | |
青稞纸电绝缘纸0.125mmQKZ-0125 | 卖方: 深圳市丹美森实业有限公司 | 序列号 指定 物业单位 单位指标值 价值观 1 标称厚度 公称厚度 mm 0.1 0.125 0.15 0.18 0.20 0.25 0.30 0.40 0.50 2 厚度公差 厚度允许公差 m... |