Laboratory Air Jet Erosion Tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Standards
The Air Jet Erosion Tester complies with internationally recognized erosion testing standards, including:
(1) ASTM G76 – Standard Test Method for Conducting Erosion Tests by Solid Particle Impingement Using Gas Jets
(2) ASTM G211 – Standard Test Method for Conducting Elevated Temperature Erosion Tests by Solid Particle Impingement Using Gas Jets
Parameters
| Parameter | Specification |
|---|---|
| Maximum temperature | Up to 900 °C |
| Temperature control | Closed-loop PID temperature control |
| Particle velocity | 30–200 m/s (optional ranges available) |
| Erodent feed rate | 1–10 g/min (optional ranges available) |
| Particle hopper capacity | Up to 3 L (optional ranges available) |
| Impact angles | 15°, 30°, 45°, 60°, 90° |
| Velocity measurement | Closed-loop high-speed dual-disc system |
| Positioning system | Automated positioning stage |
| Erodent types | Multiple particle sizes available |
Features
Repeated particle impact testing using gas-driven abrasive flow
Closed-loop PID temperature control up to 900 °C
Real-time particle velocity measurement using dual-disc timing method
Adjustable impact angles for comprehensive erosion characterization
Automated positioning platform for accurate and repeatable testing
Stainless steel particle feeding system with programmable delivery
Suitable for both ambient and high-temperature erosion testing
Accessories
(1) Automated positioning stage
(2) Stainless steel particle hopper and vibratory feeder
(3) Programmable screw-type particle feeding system
(4) Dual-disc high-speed velocity measurement module
(5) Gas pressure controller and pressure gauges
Test Procedures
Load the test specimen onto the automated positioning stage.
Select the desired abrasive particle type, size, and feed rate.
Set the required test temperature and allow the system to reach thermal stability.
Adjust the impact angle according to the test requirement.
Initiate gas flow to accelerate abrasive particles toward the specimen surface.
Monitor particle velocity, temperature, and erosion conditions during testing.
Complete the test cycle and analyze erosion results based on material loss or surface damage.
Maintenance Information
Regularly inspect and clean the particle feeding and gas flow components.
Verify calibration of the velocity measurement system to ensure accuracy.
Check temperature sensors and PID control performance periodically.
Ensure the pressure control system and gauges operate correctly.
Perform routine inspections of seals and high-temperature components to maintain safe operation.
在线联系供应商
Other supplier products
 |
Box-Type UV Accelerated Aging Chamber | This test chamber simulates the hazards caused by sunlight exposure and rain. It utilizes fluorescent UV lamps to mimic sunlight and distilled wate... |
 |
High-Precision Multi-Functional Thermal Property Testing System | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The platform supports internationally recognized absolute measurement standards,... |
 |
Urinary Catheter Strength Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The tester is suitable for testing urinary catheters in the following industri... |
 |
Automated Filtration Systems for Hydraulic Oil | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards You can operate this device in compliance with international and domestic standa... |
 |
Fabric light transmittance test machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Light transmittance test machine for fabric is used to determine the total visible light ... |
Same products
 |
Benchtop Thermal Conductivity Tester for Insulation Materials | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The instrument complies with a... |
 |
High-Accuracy Guarded Heat Flow Meter Thermal Conductivity Measurement System | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The instrument is designed and... |
 |
Heat Flow Method for Thermal Conductivity Measurement | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The instrument complies with a... |
 |
Benchtop Thermal Conductivity Tester | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The instrument is designed and... |
 |
Guarded Heat Flow Measurement System | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ASTM E1530: Standard Test Meth... |
