Laboratory Air Jet Erosion Tester

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Standards

The Air Jet Erosion Tester complies with internationally recognized erosion testing standards, including:

(1) ASTM G76 – Standard Test Method for Conducting Erosion Tests by Solid Particle Impingement Using Gas Jets

(2) ASTM G211 – Standard Test Method for Conducting Elevated Temperature Erosion Tests by Solid Particle Impingement Using Gas Jets

Parameters

Parameter	Specification
Maximum temperature	Up to 900 °C
Temperature control	Closed-loop PID temperature control
Particle velocity	30–200 m/s (optional ranges available)
Erodent feed rate	1–10 g/min (optional ranges available)
Particle hopper capacity	Up to 3 L (optional ranges available)
Impact angles	15°, 30°, 45°, 60°, 90°
Velocity measurement	Closed-loop high-speed dual-disc system
Positioning system	Automated positioning stage
Erodent types	Multiple particle sizes available

Features

Repeated particle impact testing using gas-driven abrasive flow

Closed-loop PID temperature control up to 900 °C

Real-time particle velocity measurement using dual-disc timing method

Adjustable impact angles for comprehensive erosion characterization

Automated positioning platform for accurate and repeatable testing

Stainless steel particle feeding system with programmable delivery

Suitable for both ambient and high-temperature erosion testing

Accessories

(1) Automated positioning stage

(2) Stainless steel particle hopper and vibratory feeder

(3) Programmable screw-type particle feeding system

(4) Dual-disc high-speed velocity measurement module

(5) Gas pressure controller and pressure gauges

Test Procedures

Load the test specimen onto the automated positioning stage.

Select the desired abrasive particle type, size, and feed rate.

Set the required test temperature and allow the system to reach thermal stability.

Adjust the impact angle according to the test requirement.

Initiate gas flow to accelerate abrasive particles toward the specimen surface.

Monitor particle velocity, temperature, and erosion conditions during testing.

Complete the test cycle and analyze erosion results based on material loss or surface damage.

Maintenance Information

Regularly inspect and clean the particle feeding and gas flow components.

Verify calibration of the velocity measurement system to ensure accuracy.

Check temperature sensors and PID control performance periodically.

Ensure the pressure control system and gauges operate correctly.

Perform routine inspections of seals and high-temperature components to maintain safe operation.

Другие товары поставщика

	Laboratory Rolling Bearing Fatigue Tester Manufacturer China	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Rolling Contact Fatigue Tester is a specialized testing system designed to in...
	Photovoltaic module damp heat test chamber	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Photovoltaic Module Damp Heat Test Chamber is designed to simulate long-term tropical a...
	Automotive Wire Protective Coating Puncture Test SAE/ISO	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Features (1) Precise force application for consistent puncture testing. (2)...
	Safety Footwear Electrical Hazard Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Safety Footwear Electrical Hazard Tester is designed to evaluate the dielectric strengt...
	ASTM G133 Linear Reciprocating Tribometer Manufacturer	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Linear Constant-Speed Reciprocating Friction and Wear Tester is a special...

Все товары поставщика

Похожие товары

	PanEVAP & MVR system	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat...
	PanGAP wide gap welded plate heat exchanger	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel...
	PanBloc welded plate heat exchanger	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac...
	PanBox welded plate heat exchanger	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated...
	PanPHE gasketed plate heat exchangers	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanPHE gasketed plate heat exchangersare designed with easy access for regular servicing and for ...