Film impact Tester (Gardner)
The Film Impact Tester (Gardner) is designed to evaluate the impact resistance of coatings and paint films. It determines the degree of damage such as cracking, chipping, or delamination after an impact, providing objective data for quality control, research, and product development. The instrument features a simple structure, user-friendly operation, and precise measurement capabilities, fully meeting the requirements of national and international standards.
Application
(1) Determining the impact resistance of paint films and coatings in laboratories.
(2) Evaluating coating flexibility and adhesion after impact.
(3) Assessing the degree of damage such as cracking, peeling, or indentation caused by impact.
(4) Quality control of coated products in automotive, electronics, construction, and other industries.
(5) Research and development of new coatings with enhanced impact strength.
(6) Ensuring compliance with national and international standards for coating impact resistance.
(7) Simulating real-world impact events in a controlled laboratory environment.
Standards
(1) GB/T 1732-2020 – Paints and varnishes – Determination of impact resistance.
(2) ASTM D2794 – Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact).
(3) ISO 6272 – Paints and varnishes – Determination of resistance to impact.
Features
(1) Novel design with a simple structure for ease of use.
(2) Adjustable drop height for controlled impact testing.
(3) Standardized weights and punches for repeatable results.
(4) Provides precise and objective measurement of coating impact resistance.
(5) Essential tool for quality control and R&D in the paint and coatings industry.
(6) Compact and robust, suitable for laboratory environments.
Parameters
| Parameter | Specification |
|---|---|
| Maximum impact height | 1000 mm |
| Weight range | 1000 g–1 g |
| Punch diameter | 8 mm |
| Instrument weight | 15 kg |
| Dimensions (L×W×H) | 200 × 200 × 1300 mm |
Accessories
(1) Standard impact punches
(2) Calibrated weights for impact testing
(3) Operation manual and safety instructions
Test Procedures
(1) Place the coated sample securely on the test stage.
(2) Select the appropriate weight and punch for the test.
(3) Adjust the drop height to the desired level according to testing requirements.
(4) Release the weight to impact the sample.
(5) Observe and record the degree of damage, such as cracking, chipping, or delamination.
(6) Repeat the test as needed for multiple samples or heights.
(7) Compare results to standards or specifications for quality evaluation.
Maintenance Information
(1) Keep the instrument clean and free from dust and debris.
(2) Inspect the drop mechanism, weights, and punches regularly for wear or damage.
(3) Ensure all moving parts are properly lubricated according to manufacturer instructions.
(4) Store in a dry environment to avoid corrosion or rust.
(5) Handle punches and weights carefully to prevent deformation or damage.
(6) Perform periodic calibration to ensure accurate and reliable measurements.
在线联系供应商
Other supplier products
 |
Cylindrical Battery In-Situ Volume Swelling Testing System | The Cylindrical Battery In-Situ Volume Swelling Testing System is designed for real-time measurement and analysis of volume and dimensional changes... |
 |
Luggage lifting and unloading testing machine | The luggage simulation lifting and unloading tester is a measuring instrument for the life of the handle of the luggage carrier. It is one of the i... |
 |
Drying Rate Tester | Product Introduction The Drying Rate Tester is designed according to AATCC201 standard requirements. Equipped with high-precision temperature and ... |
 |
Sloped Impact Tester | Standard ASTM D7748: Impact resistance testing of packaging and transport systems. ISO 13355: Automotive component durability evaluation unde... |
 |
Coatings Shear Fatigue Test device | Standard YY/T 0988.13-2017 (China): Specifies shear fatigue testing protocols for coatings on metallic substrates, including load ratios, frequenc... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
