Cheap liquid silicone rubber to make molds for lost was casting
Cheap liquid silicone rubber to make molds for lost was casting
Lost Wax Casting Silicone
GC RTV silicone C-825 are good for lost wax casting. They are widely used for lost wax process of bronze casting to make accurate reproductions of original sculpture.
|
Typical general characteristics |
Inspection Method |
Value |
|
Product data (Catalyzed A+B) |
C-825 |
|
|
Hardness |
Shore A |
25±2 |
|
Mix Ratio |
A:B |
100:3 |
|
Color |
/ |
White |
|
Pot life |
25 °C (77F) |
30-40mins |
|
Curing time |
25 °C (77F) |
3-4 hours |
|
Mixed viscosity |
20000±1000 |
|
|
Tear-strength |
kg/cm |
22±2 |
|
Tensile-strength |
||
|
Elongation |
% |
450±50 |
|
Shrinkage |
% |
≤0.3 |
Note: This is a 100A:3B mix ratio product that must be measured by weight. The choosing of suitable hardness should be according to the size and pattern design of the products. If large products and therefore multiple-piece molds are needed by customers, silicone rubber with higher hardness will be required for the molds. Conversely, soft silicon is indispensable for molds with complicated pattern and delicate details. The amount of curing agent admixture depends on the actual need of customers. More will be added for speedy drying and fast release and less when otherwise.
Low viscosity,great flexibility,Extra low shrinkage,Chemical resistance,release properties, Easy to work with,High tear strength,Heat Resistance,various color is available,High reproduction rate
Part A: Silicone rubber is a white liquid
Part B: Catalyst is a non-toxic and odorless liquid, white transparent color.
ATT: We can provide fast/medium/slow catalyst of for hot, warm or cold season.
When stored at or below 32°C (89.6°F) in the original unopened containers, C-8 series Silicone Base and its Curing Agents have a usable life of I0 months.
Silicone base:1kg/drum; 20kg/drum;25kg/drum;200kg/drum.
Curing Agent: 30g/bottle; 1kg/bottle
在线联系供应商
Other supplier products
 |
Where to buy silicone rubber molding material for shoe sole mould | Where to buy silicone rubber molding material for shoe sole mould Shoe Sole molding Silicone GC RTV silicone C-825 are good for shoe sole molding... |
|
|
Cheap liquid silicone rubber to make molds for lost was casting | Cheap liquid silicone rubber to make molds for lost was casting Lost Wax Casting Silicone GC RTV silicone C-825 are good for lost wax casting. Th... |
 |
Platinum Cure rtv2 Silicone Rubber for Jewelry Molding | Platinum Cure rtv2 Silicone Rubber for Jewelry Molding Jewelry Molding Silicone Features: Application: GC silicone G-8 series are great for jew... |
 |
Platinum Cure liquid molding Silicone Rubber for rapid Prototyping | Platinum Cure liquid molding Silicone Rubber for rapid Prototyping Prototyping Silicone Features Application: GC RTV silicone G-8 series are gr... |
 |
China supplier Rtv mould making Silicone rubber for Taxidermy Molding | China supplier Rtv mould making Silicone rubber for Taxidermy Molding Taxidermy Molding Silicone GC tin cure silicone liquid mold rubbers are use... |
Same products
 |
Embossed Silicone Rubber Wristbands/Bracelets Bulk | 卖方: Yppromotion | In addition to those ordinary wristband types, YP Promotion also has a novel technology that can ... |
 |
SILICONE BRACELET | 卖方: Yppromotion | The silicone bracelet is made of solid silicone rubber pressed by an oil press. Wholesale persona... |
 |
Silicone Square ICE Cube Tray | 卖方: Shenzhen YF Technology Co.,Ltd | The square ice cube mold is square in shape, square in shape and rectangular in shape. It is main... |
 |
Silicone Sports Bottle | 卖方: Shenzhen YF Technology Co.,Ltd | Silicone Water Bottle Review Silicone sports bottle is resistant to high and low temperatures. I... |
 |
Silicone Sphere Tray | 卖方: Shenzhen YF Technology Co.,Ltd | Environmental friendly material, food grade silicone, used for making various ice cubes, which ca... |
