jmy506 iic i2c uart interface hf rfid reader and writer modules
JMY506 series are RFID reader/writer module with UART and IIC serial ports. JMY506 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The RF protocol is complex. But the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module through IIC or UART interface. And the module and antenna are separate design. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. The module and antenna is linked by 50ohm coaxial line. The performance is good, though the wire can reach 10m. Normally the wire should be 60cm that is the module's best performance and stability.
Qualifications:
- PCD: NXP RC522, RC523
- Working frequency: 13.56MHz
- Antenna connection: by 50ohm coaxial line, (recommend 60cm, Max. 10 meters), due to order
- RF standard: ISO14443A, ISO14443B
- Operating distance: 80mm(depending on card and antenna design)
- Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only
- Auto detecting card: Supported, default OFF
- EEPROM: 512 Bytes
- Interface: IIC&UART(selected by SPS pin, recommend to use IIC)
- Communication rate: IIC--400Kbps, UART--19.2Kbps/115.2Kbps
- Max.command length: 254 Bytes
- Interface level: 3.3V(TTL level; 5V tolerance)
- Power supply: DC 5.0V
- Power consumption: 50mA
- Dimension: 42mm×21mm×8mm
- Package: DIP32
- Weight: about 15g
- Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F)
- Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F)
- ISP: Supported
- RoHS: Compliant
在线联系供应商
Other supplier products
 |
3 SAM slots hf 13.56mhz rfid reader/writer - MR790 | MR790 series, based on NXP PCD or compatible PCD, is the high performance USB PC/SC interface desktop reader. The reader supports series IC cards a... |
 |
IIC, UART, USB interface HF 13.56MHz RFID writer and reader Module JMY628 | JMY628 is a RFID read/write module with UART, IIC or USB port. JMY628 has various functions and supports multi ISO/IEC standard of contactless card... |
 |
jmy504 hf rfid reader and writer modules with pcd nxp rc522 rc523 | JMY504 series are RFID reader/writer module with UART and IIC serial ports. JMY504 has various functions and supports multi ISO/IEC standard of con... |
 |
JMY602 IIC UART RS232C or USB interface HF RFID Reader and writer Module | JMY602 series are RFID reader/writer module with IIC or UART or USB ports. There are 2 SAM card slots in the module which supports SAM cards compli... |
 |
ethernet RJ45 interface hf 13.56mhz rfid reader writer - mr730 | MR730 series contactless smart reader is the Ethernet interface desktop reader based on NXP PCD or compatible PCD. It doesn't have display. The rea... |
Same products
 |
Carbon Steel Bridge Guardrail | 卖方: Wuhan Dachu Traffic Facilities Co., Ltd | Carbon steel bridgeguardrailis an important safety feature that can prevent vehicles from running... |
 |
Customized Thrie-Beam Highway Guardrail | 卖方: Wuhan Dachu Traffic Facilities Co., Ltd | Customized Thrie-Beam Highway Guardrailmay include the size and shape of the beams, the spacing b... |
 |
Non Blocked MASH-TL3 Single Steel Guardrail | 卖方: Wuhan Dachu Traffic Facilities Co., Ltd | DACHU guardrailis manufactured to AASHTO specifications in M180 Class A or B, and finish types 1,... |
 |
Hot Dip Galvanized W-Beam Guardrail | 卖方: Wuhan Dachu Traffic Facilities Co., Ltd | hot dip galvanized w-beam guardrailis cost-effective highway barriers designed to reduce the coll... |
 |
S355JR Steel W Beam Road Crash Barrier | 卖方: Wuhan Dachu Traffic Facilities Co., Ltd | This hot-dip galvanized steel W beamis one of the highway safety products from DACHUconforms to A... |
