jmy506 iic i2c uart interface hf rfid reader and writer modules
JMY506 series are RFID reader/writer module with UART and IIC serial ports. JMY506 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The RF protocol is complex. But the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module through IIC or UART interface. And the module and antenna are separate design. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. The module and antenna is linked by 50ohm coaxial line. The performance is good, though the wire can reach 10m. Normally the wire should be 60cm that is the module's best performance and stability.
Qualifications:
- PCD: NXP RC522, RC523
- Working frequency: 13.56MHz
- Antenna connection: by 50ohm coaxial line, (recommend 60cm, Max. 10 meters), due to order
- RF standard: ISO14443A, ISO14443B
- Operating distance: 80mm(depending on card and antenna design)
- Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only
- Auto detecting card: Supported, default OFF
- EEPROM: 512 Bytes
- Interface: IIC&UART(selected by SPS pin, recommend to use IIC)
- Communication rate: IIC--400Kbps, UART--19.2Kbps/115.2Kbps
- Max.command length: 254 Bytes
- Interface level: 3.3V(TTL level; 5V tolerance)
- Power supply: DC 5.0V
- Power consumption: 50mA
- Dimension: 42mm×21mm×8mm
- Package: DIP32
- Weight: about 15g
- Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F)
- Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F)
- ISP: Supported
- RoHS: Compliant
Send product request
Other supplier products
 |
RC522,RC523 Surface Mount Package design HF RFID Reader/Writer Module JMY620 | JMY620 series are 13.56MHz RFID reader/writer module with UART and IIC serial ports. And the module and antenna is linked by 50ohm coaxial line. Th... |
 |
IIC, UART, RS232C or USB interface HF 13.56MHz RFID writer and reader Module JMY6801 | JMY6801 is a RFID read/write module with UART, IIC, RS232C or USB port. JMY6801 has various functions and supports multi ISO/IEC standard of contac... |
 |
Surface Mount Package HF RFID Module JMY622 | JMY622 series are 13.56MHz RFID reader/writer module with UART and IIC serial ports. The module would meet EMV2000, EMV2010 and PBOC 2.0 standards.... |
 |
jmy501 hf 13.56mhz rfid reader and writer modules | JMY501 series are RFID reader/writer module with UART and IIC serial ports. JMY501 has various functions and supports multi ISO/IEC standard of con... |
 |
IIC, UART, RS232C or USB interface HF 13.56MHz RFID writer and reader Module JMY680 | JMY680 series are RFID reader/writer module with IIC or UART serial ports. JMY680 has various functions and supports multi ISO/IEC standard of cont... |
Same products
 |
Carbon Steel Bridge Guardrail | Seller: Wuhan Dachu Traffic Facilities Co., Ltd | Carbon steel bridgeguardrailis an important safety feature that can prevent vehicles from running... |
 |
Customized Thrie-Beam Highway Guardrail | Seller: Wuhan Dachu Traffic Facilities Co., Ltd | Customized Thrie-Beam Highway Guardrailmay include the size and shape of the beams, the spacing b... |
 |
Non Blocked MASH-TL3 Single Steel Guardrail | Seller: Wuhan Dachu Traffic Facilities Co., Ltd | DACHU guardrailis manufactured to AASHTO specifications in M180 Class A or B, and finish types 1,... |
 |
Hot Dip Galvanized W-Beam Guardrail | Seller: Wuhan Dachu Traffic Facilities Co., Ltd | hot dip galvanized w-beam guardrailis cost-effective highway barriers designed to reduce the coll... |
 |
S355JR Steel W Beam Road Crash Barrier | Seller: Wuhan Dachu Traffic Facilities Co., Ltd | This hot-dip galvanized steel W beamis one of the highway safety products from DACHUconforms to A... |
