Famous Brand 110kVA Cummins Gas Generator in Super Silent Type with Water Cooling
Specifications:
| GAS ENGINE SPECIFICATION | |||||||
| Engine Brand | Cummins (Convert to gas engine from Cummins diesel engine) | ||||||
| Engine Model | AB5.9G-G100 | ||||||
| Cylinder Nos. | 6 Cylinder in Line | ||||||
| Aspiration | Turbocharged & Aftercooled | ||||||
| Cooling Method | Water Cooling | ||||||
| Fuel | Natural Gas | ||||||
| Governor | ECU | ||||||
| Engine Max. Output at rate 1500R.P.M. | kWm | 100.0 | |||||
| BHP | 133.0 | ||||||
| Displacement | Liters | 5.9 | |||||
| Engine Speed | R.P.M. | 1500 | |||||
| Bore | mm | 102 | |||||
| Stroke | mm | 120 | |||||
| Fuel Comsunption at 100% load | M3/Hr | 27 | |||||
| Oil Pan Capacity | Liters | 14 | |||||
| Natural Gas Pressure | kPa | ≥3kPa | |||||
| Compression Ratio | 10.5 : 1 | ||||||
| ALTERNATOR SPECIFICATION | |||||||
| Manufacturer | Cummins Generator Technologies | ||||||
| Alternator Brand | Stamford | ||||||
| Model | UCI 274 C | ||||||
| Rate Output | kVA | 100 | |||||
| Rate Frequency | Hz | 50 | |||||
| Altitude | M | ≤1000 | |||||
| Alternator Type | Single bearing, brushless type | ||||||
| Connection Type | Three phase, four wire | ||||||
| Protection Grade | IP23 | ||||||
| Insulation Class | H | ||||||
| Voltage Regulation | AVR (model AS440) | ||||||
| Standards | Compliance with GB755, BS5000, NEMA MG1-22, IEC-34, CSA C22-100 and AS1259 Standards. | ||||||
| Alternator for choice | Brand | Leroy Somer | Marathon | APT Power | Mecc Alte | ||
| Model | LSA 44.3S5 | MP-80-4 | ASF274C | ECP34-2S/4A | |||
Products Advantages
1. High quality,reliable and complete power unit.
2. Compact design.
3. Easy start and maintenance start.
4. All generator sets are gone through rigorous testing before being released to the market place, including 50% load, 75% load, 100% load, 110% load and all protection function (low oil pressure, high water temperature, over speed, over load).
5. Fully engineered with a wide range of options and accessories.
2. Compact design.
3. Easy start and maintenance start.
4. All generator sets are gone through rigorous testing before being released to the market place, including 50% load, 75% load, 100% load, 110% load and all protection function (low oil pressure, high water temperature, over speed, over load).
5. Fully engineered with a wide range of options and accessories.
在线联系供应商
Other supplier products
 |
344kVA Famous Chinese Brand Shangchai Brand Diesel Generator in Open Type with ISO and Optional Color | Introduction: A Series Shangchai brand diesel engine generators are made up of Shangchai diesel engine (Produced by Shangchai Diesel Engine Co.,... |
 |
124kVA Famous Brand Perkins Diesel Generator with Soundproof in Water Cooling and ISO 9001 | Introduction: APT Perkins Series Diesel Generator A series Perkins diesel generator are made up of Perkins engine with Stamford alternators (pr... |
 |
Famous Brand 550kVA Deutz Diesel Generator with Open Type/ Silent/ Super Silent | Introductin: A Series Deutz diesel generator sets are made up of Deutz engines produced by Deutz (Dalian) Engine Co., Ltd., and Stamford alterna... |
 |
99kVA Soundproof/ Open Type Cummins Diesel Generator with Water Cooling and Optional Color and ISO | Introduction: A Series Cummins diesel generator set are made up of Cummins engines Chongqing Cummins Engine Co., Ltd and Stamford alternators pr... |
 |
11kVA Silent Quanchai Diesel Generator with ISO Famous Chinese Brand for Diesel Generator | Introduction: A Series Quanchai brand diesel engine generators are made up of Quanchai diesel engine (Produced by Anhui Quanchai Engine Co., Ltd... |
Same products
 |
Sunkaier Vertical Powder Dryer | 卖方: Jiangsu Sunkaier Industrial Technology Co., Ltd. | Sunkaier Vertical Powder Dryer Vertical Cone Dryer Outline: Sunkaier vertical powder dr... |
 |
再结晶碳化硅板 | 卖方: 唐山星斗碳化硅陶瓷有限公司 | 同等工况下厚度可以更薄，使用温度可达1700℃，高温高承载力和良好的尺寸稳定性及抗氧化、抗侵蚀能力，可用于陶瓷工业辊道窑、隧道窑和梭式窑中的窑具，轻量化理想窑具，更节能,主要应用于氧化铝&... |
 |
Custom Black ABS Resin CNC Machining Parts Plastic Prototypes | 卖方: 广东顺德天沃模型技术有限公司 | 批量生产：小批量生产； 精度：高精度； 引导时间：3-5天； 可定制或可定制：可定制 |
 |
Rapid Prototyping Service | 卖方: 新航金属制品有限公司 | 通过我们的快速原型制作服务，让您的创新想法落地。 我们专注于定制金属和塑料零件制造，提供符合您具体规格的高质量原型。 加工：CNC加工、快速成型、3D打印 尺寸范围：最小1毫米，最大25... |
 |
Custom Sheet Metal Products Fabrication | 卖方: 新航金属制品有限公司 | 我们经验丰富的专家团队提供根据您的具体规格量身定制的定制钣金产品制造服务。 我们为使用最新的技术和工艺来确保您的成品超出您的期望而感到自豪。 |
