Famous Brand 110kVA Cummins Gas Generator in Super Silent Type with Water Cooling
Specifications:
| GAS ENGINE SPECIFICATION | |||||||
| Engine Brand | Cummins (Convert to gas engine from Cummins diesel engine) | ||||||
| Engine Model | AB5.9G-G100 | ||||||
| Cylinder Nos. | 6 Cylinder in Line | ||||||
| Aspiration | Turbocharged & Aftercooled | ||||||
| Cooling Method | Water Cooling | ||||||
| Fuel | Natural Gas | ||||||
| Governor | ECU | ||||||
| Engine Max. Output at rate 1500R.P.M. | kWm | 100.0 | |||||
| BHP | 133.0 | ||||||
| Displacement | Liters | 5.9 | |||||
| Engine Speed | R.P.M. | 1500 | |||||
| Bore | mm | 102 | |||||
| Stroke | mm | 120 | |||||
| Fuel Comsunption at 100% load | M3/Hr | 27 | |||||
| Oil Pan Capacity | Liters | 14 | |||||
| Natural Gas Pressure | kPa | ≥3kPa | |||||
| Compression Ratio | 10.5 : 1 | ||||||
| ALTERNATOR SPECIFICATION | |||||||
| Manufacturer | Cummins Generator Technologies | ||||||
| Alternator Brand | Stamford | ||||||
| Model | UCI 274 C | ||||||
| Rate Output | kVA | 100 | |||||
| Rate Frequency | Hz | 50 | |||||
| Altitude | M | ≤1000 | |||||
| Alternator Type | Single bearing, brushless type | ||||||
| Connection Type | Three phase, four wire | ||||||
| Protection Grade | IP23 | ||||||
| Insulation Class | H | ||||||
| Voltage Regulation | AVR (model AS440) | ||||||
| Standards | Compliance with GB755, BS5000, NEMA MG1-22, IEC-34, CSA C22-100 and AS1259 Standards. | ||||||
| Alternator for choice | Brand | Leroy Somer | Marathon | APT Power | Mecc Alte | ||
| Model | LSA 44.3S5 | MP-80-4 | ASF274C | ECP34-2S/4A | |||
Products Advantages
1. High quality,reliable and complete power unit.
2. Compact design.
3. Easy start and maintenance start.
4. All generator sets are gone through rigorous testing before being released to the market place, including 50% load, 75% load, 100% load, 110% load and all protection function (low oil pressure, high water temperature, over speed, over load).
5. Fully engineered with a wide range of options and accessories.
2. Compact design.
3. Easy start and maintenance start.
4. All generator sets are gone through rigorous testing before being released to the market place, including 50% load, 75% load, 100% load, 110% load and all protection function (low oil pressure, high water temperature, over speed, over load).
5. Fully engineered with a wide range of options and accessories.
Send product request
Other supplier products
 |
55kVA Soundproof Cummins Diesel Generator with Water Cooling Low Noise/ Open Type/ Slient Optional | Introduction: A Series Cummins diesel generator set are made up of Cummins engines Chongqing Cummins Engine Co., Ltd and Stamford alternators pr... |
 |
99kVA Soundproof/ Open Type Cummins Diesel Generator with Water Cooling and Optional Color and ISO | Introduction: A Series Cummins diesel generator set are made up of Cummins engines Chongqing Cummins Engine Co., Ltd and Stamford alternators pr... |
 |
495kVA Super Slient or Open Type Cummins Diesel Generator in Water Cooling with ISO | Introduction:A Series Cummins diesel generator set are made up of Cummins engines Chongqing Cummins Engine Co., Ltd and Stamford alternators produc... |
|
|
Famous Brand 110kVA Cummins Gas Generator in Super Silent Type with Water Cooling | Specifications: GAS ENGINE SPECIFICATION Engine Brand Cummins (Convert to gas engine from Cummins diesel engine) Engine Model AB... |
 |
Famous Brand 110kVA Cummins Gas Generator in Super Silent Type with Water Cooling | Company Profile:Fuzhou APT Power Co., Ltd is a comprehensive company. The company focuses its business on diesel generator, developing, producing a... |
Same products
 |
Sunkaier Vertical Powder Dryer | Seller: Jiangsu Sunkaier Industrial Technology Co., Ltd. | Sunkaier Vertical Powder Dryer Vertical Cone Dryer Outline: Sunkaier vertical powder dr... |
 |
RSiC kiln shelf, recrystallized silicon carbide plate,ReSiC batt, slabs | Seller: Tangshan Sndou SiC Ceramics CO,Ltd | kiln furniture of alumina zirconia ceramic, honeycomb ceramic, foam filter ceramic,ITO target, ML... |
 |
Custom Black ABS Resin CNC Machining Parts Plastic Prototypes | Seller: GUANGDONG SHUNDE TEAMWORK MODEL TECHNOLOGY CO., LTD | Batch production: Low volume production; Precision:High precision; Leading time: 3-5 days; C... |
 |
Rapid Prototyping Service | Seller: Neway Precision Works Ltd | Get your innovative ideas off the ground with our rapid prototyping service. We specialize in c... |
 |
Custom Sheet Metal Products Fabrication | Seller: Neway Precision Works Ltd | Our experienced team of experts provides custom sheet metal products fabrication services tailo... |
