BD 3-Jaw Large Through-Hole Hollow Hydraulic Power Chuck For Thick Bar
(1). BD 3-jaw large through-hole hollow hydraulic chuck with 6 inch, 8 inch, 10 inch, 12 size.
(2). Clamping force is large, long stroke achieve large clamping range. Larger through hole is Suitable for processing thick rod-type workpiece, more economical.
(3). When loading different workpieces, only need to change the clamps to use.
(4). Repeat positioning accuracy : 0.02mm.
(5).Material: Steel.
Other supplier products
|
|
KL/KLT/KLH 2-Jaw / 3-Jaw / 4-Jaw Long Stroke Solid Hydraulic Power Chuck |
(1). KL / KLT /KLH solid hydraulic chuck with 4 inch, 5 inch, 6 inch, 8 inch, 10 inch, 12 inch size and divided into 2- jaw type, 3-jaw type, 4-jaw... |
|
|
NHU 45 degrees/90 degrees High-Speed Automatic Quartered Hydraulic Indexing Power Chuck |
(1). Due to the small outer diameter of the chuck, suitable for small CNC lathes. (2). In the work of no loss of grip, the smaller hydraulic pressu... |
|
|
BUE 3-Jaw Pull Back Draw Down Power Chuck for I.D.verticality and parallelism |
(1). BUE I.D. pull back chuck apply for machining verticality and parallelism have the required workpieces, such chuck a wide range of clampings. (... |
|
|
MDS/MDL 3-Jaw / 6-Jaw Diaphragm Clamping Power Chuck For Gear Processing |
(1). Diaphragm chuck is a fully sealed chuck, 3-jaw type, 6-jaw type to choose. (2). It is based on the outer diameter of the gear P.C.D for clampi... |
|
|
NHRD 45 degrees/90 degrees Automatic Quartered Centering Hydraulic Indexing Power Chuck |
(1). NHRD chuck NHR chuck based on the expansion of the center positioning workers to ensure that the workpiece when drilling position accuracy. (2... |
All supplier products
Same products
