Impact Abrasion Resistance Tester
Getaquote:
Whats/App: +86 181 0160 0864
The Protective Clothing Impact Abrasion Tester is designed to evaluate the impact abrasion resistance of motorcycle protective clothing. It simulates abrasion damage caused by impact when riders travel on gravel or rough road surfaces, allowing you to objectively assess the protective performance of garments under severe riding conditions.
Application
You use this tester to evaluate the abrasion resistance of motorcycle protective clothing under impact conditions.
It is suitable for testing motorcycle jackets, pants, protective suits, reinforced fabric panels, elbow and knee protection areas, and other protective components used in motorcycle rider apparel.
Standards
The Protective Clothing Impact Abrasion Tester complies with the following standard:
(1) GB/T 24278-2019 Protective clothing for motorcycle riders
Parameters
| Item | Specification |
|---|---|
| Control System | Industrial-grade PLC |
| Operation Interface | 7-inch color touchscreen, Chinese/English |
| Operation Mode | Full touchscreen operation, programmable test settings |
| Printer | Built-in printer |
| Belt Speed | 8 m/s |
| Belt Hardness | Grit OP60 |
| Abrasion Area | 1963 mm² |
| Applied Force on Specimen | 49 N |
| Net Pressure on Specimen | 25 kPa |
| Drop Height | 50 mm |
| Specimen Holder | Diameter Φ75 mm |
| Cleaning Brush | Diameter Φ200 mm, polypropylene bristles, 0.2 mm thickness, 45 mm free length |
| Software Interface | USB interface, data reading and PC connection |
Features
You can set test parameters directly through the intelligent control system.
The tester performs automatic cyclic testing after parameter input, reducing manual intervention.
You can pause the test at any time to observe specimen abrasion by opening the safety door.
A servo drive system ensures fast response, stable speed, and no speed fluctuation during testing.
The system provides stable and repeatable test results for impact abrasion evaluation.
Accessories
(1) Main testing unit
(2) User manual
(3) Certificate of conformity
(4) Warranty card
(5) Delivery confirmation document
(6) Nameplate
(7) Power cable
(8) Wrench set
(9) Product brochures
Test Procedures
You fix the specimen securely in the specimen holder.
Set test parameters such as speed and test conditions via the touchscreen interface.
Start the test, and the specimen is subjected to impact abrasion through controlled motion.
During the test, you may pause operation to inspect abrasion damage if required.
After completion, test data can be printed or transferred to a computer for analysis.
Maintenance Information
You should regularly clean the abrasion belt and cleaning brush to ensure consistent test conditions.
Mechanical and drive components should be inspected periodically for stable operation.
Electrical connections and the control system should be checked to prevent faults.
Routine calibration and inspection help maintain long-term accuracy and reliability.
Send product request
Other supplier products
 |
Oil Separator Test Rig | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Oil Separator Test Rigis designed for automated testing procedures in order to... |
 |
MST Medical Compression Stocking Pressure Tester | Getaquote: Whats/App: +86 181 0160 0864 The MST Clothing Pressure Tester/Underwear Pressure tester is used in the body or in the laboratory to ea... |
 |
Fogging Tester | Get a quote： Whats/App: +86 181 0160 0864 Fogging Tester is mainly used to test the evaporation of volatile components in materials such as inter... |
 |
Steel Hook Bending Tester Machine | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Steel Hook Bending Tester Machine is designed to evaluate the bending resistan... |
 |
Flame Spread Calorimeter | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Flame Spread Calorimeter is a high-performance testing device designed to accu... |
Same products
 |
Common Rail Injector Valve F00R J02 012 | Seller: 868983 | Common Rail Injector Valve F00R J02 012 David Chen |
 |
Common Rail Injector Valve F00R J02 005 | Seller: 868983 | Common Rail Injector Valve F00R J02 005 David Chen |
 |
Common Rail Injector Valve F00R J01 945 | Seller: 868983 | Common Rail Injector Valve F00R J01 945 David Chen |
 |
Common Rail Injector Valve F00R J01 941 | Seller: 868983 | Common Rail Injector Valve F00R J01 941 David Chen |
 |
Common Rail Injector Valve F00R J01 924 | Seller: 868983 | Common Rail Injector Valve F00R J01 924 David Chen |
