Impact Abrasion Resistance Tester
Getaquote:
Whats/App: +86 181 0160 0864
The Protective Clothing Impact Abrasion Tester is designed to evaluate the impact abrasion resistance of motorcycle protective clothing. It simulates abrasion damage caused by impact when riders travel on gravel or rough road surfaces, allowing you to objectively assess the protective performance of garments under severe riding conditions.
Application
You use this tester to evaluate the abrasion resistance of motorcycle protective clothing under impact conditions.
It is suitable for testing motorcycle jackets, pants, protective suits, reinforced fabric panels, elbow and knee protection areas, and other protective components used in motorcycle rider apparel.
Standards
The Protective Clothing Impact Abrasion Tester complies with the following standard:
(1) GB/T 24278-2019 Protective clothing for motorcycle riders
Parameters
| Item | Specification |
|---|---|
| Control System | Industrial-grade PLC |
| Operation Interface | 7-inch color touchscreen, Chinese/English |
| Operation Mode | Full touchscreen operation, programmable test settings |
| Printer | Built-in printer |
| Belt Speed | 8 m/s |
| Belt Hardness | Grit OP60 |
| Abrasion Area | 1963 mm² |
| Applied Force on Specimen | 49 N |
| Net Pressure on Specimen | 25 kPa |
| Drop Height | 50 mm |
| Specimen Holder | Diameter Φ75 mm |
| Cleaning Brush | Diameter Φ200 mm, polypropylene bristles, 0.2 mm thickness, 45 mm free length |
| Software Interface | USB interface, data reading and PC connection |
Features
You can set test parameters directly through the intelligent control system.
The tester performs automatic cyclic testing after parameter input, reducing manual intervention.
You can pause the test at any time to observe specimen abrasion by opening the safety door.
A servo drive system ensures fast response, stable speed, and no speed fluctuation during testing.
The system provides stable and repeatable test results for impact abrasion evaluation.
Accessories
(1) Main testing unit
(2) User manual
(3) Certificate of conformity
(4) Warranty card
(5) Delivery confirmation document
(6) Nameplate
(7) Power cable
(8) Wrench set
(9) Product brochures
Test Procedures
You fix the specimen securely in the specimen holder.
Set test parameters such as speed and test conditions via the touchscreen interface.
Start the test, and the specimen is subjected to impact abrasion through controlled motion.
During the test, you may pause operation to inspect abrasion damage if required.
After completion, test data can be printed or transferred to a computer for analysis.
Maintenance Information
You should regularly clean the abrasion belt and cleaning brush to ensure consistent test conditions.
Mechanical and drive components should be inspected periodically for stable operation.
Electrical connections and the control system should be checked to prevent faults.
Routine calibration and inspection help maintain long-term accuracy and reliability.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Constant elongation stress meter | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk A Constant Elongation Stress Meter is a specialized testing device designed to mea... |
 |
Smoke Toxicity Test Equipment (Squirrel Cage Method) | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The GB/T 20285 Material Smoke Toxicity Test Apparatus (Mouse Cage Method) is a spe... |
 |
PV Module Testing Equipment – UV Aging Test Chamber | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The UV Aging Test Chamber for photovoltaic (PV) modules is designed to simulate lo... |
 |
Wet Abrasion Scrub Tester | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Wet Abrasion Scrub Tester is designed to evaluate the resistance of painted, c... |
 |
Thermal Conductivity Tester (Heat Flow Method) | Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk Thermal Conductivity Tester (Heat Flow Method) is a high-precision instrument desi... |
Похожие товары
 |
Высокоскоростная экструзионная линия для производства гофрированных труб с двойными стенками из ПЭВП с водяным охлаждением | Продавец: Shandong HUASU Plastic Technology Co.,Ltd. | Формы имеют структуру с двойным каналом потока и фильерную головку, обработанную азотированием и ... |
 |
PanEVAP & MVR system | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
