Rubber Seated Flapper Check Valve
Rubber seated check valve is mainly made up of body, cover and disc, and the disc adopts steel plate coated with rubber. It mainly applies to the water outlet of the water supply and drainage system to prevent backflow and water hammer damage to the pump.
The valve disc is made of EPDM rubber and steel plate by high temperature pressing, with good scour resistance and sealing performance, and the switch life can reach 1 million times. The product has the characteristics of simple structure, convenient maintenance, repair and transportation.
1.Standard
Design & manufacturing |
BS5153 |
Face to face |
BS5153, DIN3202 F6 |
Flange ends |
EN1092-2, ASME B16.1/B16.42, AS4087 |
Inspection & testing |
EN12266 |
2.Technical Specification
Size |
DN50-800 |
Working Pressure |
PN10/16 |
Applicable medium |
water, sewage, waste water |
Applicable temperature |
0℃~80℃ |
3.Main parts material
Part Name |
Material |
Body |
Ductile Iron |
Bonnet |
Ductile Iron |
Disc |
WCB+EPDM |
Shaft |
SS420 |
Fasteners |
Carbon steel/Stainless steel |
4. Features
- Small head loss, not easy to accumulate debris, easy maintenance
- Quick disc closing and low water hammer pressure
- Both horizontal and vertical piping can be used, easy to install
- Unobstructed flow channel and low fluid resistance
- Good sealing performance
- Short disc stroke and small impact force when closing the valve
- Long service life and high reliability
Send product request
Other supplier products
Flange Adaptor | Flange adaptor is designed to transfer thepressure thrust of connected pipes andcompensate pipe error, reduce the damage of axial thrust against pi... | |
Y Strainer | Y-type strainer is an indispensable filter device in the pipeline system of conveying medium. Y-type strainer is usually installed at the inlet end... | |
Flanged Double Eccentric Butterfly Valve | Double eccentric butterfly valve is a further improvement on the basis of single eccentric butterfly valve. The structure feature is that the stem ... | |
Socket End Resilient Seated Gate Valve for PVC Pipe | Non-rising stem resilient seated gate valve is one type of gate valve with flexible wedge as its on-off disc, which moving direction is perpendicul... | |
Non-rising Stem Resilient Seated Gate Valve | Non-rising stem resilient seated gate valve is made of good ductile iron material. The wedge has the function of exchange. Good sealing effect can ... |
Same products
Клапан | Seller: RongTengXinNuo(Tianjin) International Trade Co.,Ltd | Клапан | |
Class 300 Valve | Seller: GangYe Group Co.,Ltd. | Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing... | |
Class 3000 Industrial Valve | Seller: GangYe Group Co.,Ltd. | Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-... | |
Class 2500 Industrial Valve | Seller: GangYe Group Co.,Ltd. | Class 2500 valves can be used for both on-off and throttling applications. The specific valve typ... | |
Class 150 Valve | Seller: GangYe Group Co.,Ltd. | globe valve class 150is a pressure rating designation defined by standards organizations, such as... |