Bolting Rig
The rock bolting rigis mainly designed for the construction of tunnels, culverts, subway and small foundation pits. The drill with impact power head is suitable for construction in different strata under clay, sand and weathering.
It is more efficient to cooperate with air compressor and pneumatic DTH hammer to construct in hard rock stratum. Country III emission standard, 360 degree rotation in all directions. The drilling rig equipment can carry out full-section construction including front face, left and right sides, top of tunnel and vertical hole.
A special rotary spraying construction operation handle is designed to facilitate the adjustment of rotational speed and lifting speed during rotary spraying construction and improve work efficiency.
ABT rock bolting rigs are widely used for rock bolting in mining and tunneling applications. Our bolting rig make underground drilling and blasting not only a productive operation but also a safe one in tunneling and underground mining, steel rod inserted in a hole drilled into the roof or walls of a rock formation to provide support to the roof or sides of the cavity. Rock bolt can be used in any excavation geometry, which is not only simple and quick to apply, but also relatively inexpensive. The length of the bolts and their spacing are available in various specifications for different requirements.
ANBIT-50/70A Multi-function DTH Drill Rig
ZGM1240A Bolting Rig
ZGYX-420/425SC Bolting Rig
Send product request
Other supplier products
 |
NUMA Series High Pressure Drill Bit | Our drill bits are interchangeable with various products manufactured by Atlas Copco. Specification Specification of NUMA Series High Pressure Dr... |
 |
R.C. Hammer | NRC Reverse Circulation Hammer(we can also call it rc hammer) Transannular counter-circulation impactor is also called hollow type impactor, the ce... |
 |
R.C. Hammer | RC Hammer ABT's low-pressure impactor is suitable for application needs working pressure. It uses low-pressure air to push the piston to hit the d... |
 |
Big Taps | Accidents occasionally occur during the construction of the submersible drilling, when the bit falls into the hole, which not only damages the tool... |
 |
Skid-Mounted Diesel Air Compressor | The skid mounted air compressorhas a skid-mounted base, which is convenient to connect with other transport equipment. It is mainly suitable for th... |
Same products
 |
Hole Opener Bit | Seller: Anbit mechanical and Electrical Equipment Co., Ltd. | Hole Opener Drill Bit The following pipe bit is mainly used to drive iron pipe to drill together ... |
 |
Hand Hammer Drill | Seller: Anbit mechanical and Electrical Equipment Co., Ltd. | The hand hammer drill machinehole diameter is 19 ~ 42mm, and the hole depth is up to 5m, usually ... |
 |
Hammer | Seller: Anbit mechanical and Electrical Equipment Co., Ltd. | ABT supplies a series of DTH hammers for sale. All DTH hammer drills features high energy-efficie... |
 |
Eccentric Overburden Drilling Equipment | Seller: Anbit mechanical and Electrical Equipment Co., Ltd. | Eccentric drillingis used for casing following drilling while drilling in soil layer. Product Des... |
 |
Diamond Reaming Shell | Seller: Anbit mechanical and Electrical Equipment Co., Ltd. | Specification Specification of Diamond Reaming Shell Category Bit Size (mm) PDC reaming s... |
