Withdrawal Sleeve
Withdrawal sleeve mainly used to fix the tapered bore bearing on the cylindrical journal of the stepped shaft. It is pressed between the bearing inner ring and the shaft leaning against the shaft shoulder or similar fixing device. Nuts or end plates can be used to fix the withdrawal sleeve.Can use KM or HM lock nuts with appropriate locking devices (lock nuts that require keyway). Withdrawal sleeve is widely used in textile, light industry, papermaking, metallurgy, belt transportation and conveying equipment industries. The large and medium-sized withdrawal sleeves are equipped with oil passages and oil grooves, which are easy to disassemble by filling oil during disassembly, and can also be disassembled by hydraulic nuts.
Other supplier products
|
|
Adapter Sleeve |
Adapter sleeves are common components, which can fix tapered bore bearings (aligning ball bearings, spherical roller bearings) on cylindrical mount... |
|
|
Lock Washer |
The lock washer is mainly used to prevent loosening of the parts matched with washer. The most common ones are spring washers, flat washers, and in... |
|
|
Concentric Locking ring |
The concentric Locking ring is a common mechanical fastener used for axial positioning, with simple structure and easy installation. The locking me... |
|
|
Precision Locknut |
Precision locknut is a common locking part in mechanical parts, used to lock gears, pulleys, and other mechanical parts. The lock nut is used to po... |
|
|
Coupling |
The coupling is used to firmly connect the driving shaft and the driven shaft in different mechanisms to rotate together and transmit motion and to... |
All supplier products
Same products
