Lock Washer
The lock washer is mainly used to prevent loosening of the parts matched with washer. The most common ones are spring washers, flat washers, and internal tooth washers. The washer used with the adapter sleeve is an external tooth washer. The corresponding adapter sleeve models are divided into metric and inch. When using the nut, the outer teeth of the washer corresponding to the nut groove must be pressed to the bottom of the nut groove to achieve the lock. Tight effect. For the locking card and locking piece used in large models, after tightening the nut, the locking card and locking piece must be fixed to the nut and bushing groove by screws to achieve the locking effect.
Other supplier products
|
Withdrawal Sleeve |
Withdrawal sleeve mainly used to fix the tapered bore bearing on the cylindrical journal of the stepped shaft. It is pressed between the bearing in... |
|
Hydraulic nuts |
Hydraulic nuts are used for bolts that need to be disassembled frequently; pre-tightening of super-large bolts; locking of large workpiece, etc. It... |
|
Heave tight coupling sleeve |
Heave tight coupling sleeve are widely used in heavy load,it is the mechanical coupling of an advanced base parts. In the coupling of shaft and the... |
|
Locknut |
Locknut is common used locking part in mechanical parts, can be used to lock gears, pulleys, and other mechanical parts.The lock nut is used to pos... |
|
Adapter Sleeve |
Adapter sleeves are common components, which can fix tapered bore bearings (aligning ball bearings, spherical roller bearings) on cylindrical mount... |
All supplier products
Same products