Coupling
The coupling is used to firmly connect the driving shaft and the driven shaft in different mechanisms to rotate together and transmit motion and torque. Sometimes it is also used to connect shafts and other parts (such as gears, pulleys, etc.). It is often composed of two halves, which are connected by a key or tight fit, respectively, and fastened to the ends of the two shafts, and then the two halves are connected in some way. The coupling can also compensate for the deviation between the two shafts due to inaccurate manufacturing and installation, deformation or thermal expansion during work, etc. (including axial deviation, radial deviation, angular deviation or comprehensive deviation) ; And alleviate the impact and absorb vibration.
Send product request
Other supplier products
 |
Withdrawal Sleeve | Withdrawal sleeve mainly used to fix the tapered bore bearing on the cylindrical journal of the stepped shaft. It is pressed between the bearing in... |
 |
Precision Locknut | Precision locknut is a common locking part in mechanical parts, used to lock gears, pulleys, and other mechanical parts. The lock nut is used to po... |
 |
Heave tight coupling sleeve | Heave tight coupling sleeve are widely used in heavy load,it is the mechanical coupling of an advanced base parts. In the coupling of shaft and the... |
 |
Lock Washer | The lock washer is mainly used to prevent loosening of the parts matched with washer. The most common ones are spring washers, flat washers, and in... |
|
|
Coupling | The coupling is used to firmly connect the driving shaft and the driven shaft in different mechanisms to rotate together and transmit motion and to... |
