Large diameter blasting test machine
Standard
ASTM D1599: Compliant for short-time hydraulic failure testing of thermoplastic pipes under linear pressure ramp.
ISO 1167: Configurable for long-term hydrostatic pressure resistance testing (optional module).
Product Advantages
1. Unmatched Pressure Capacity
600 Bar Max. Operating Pressure: Tests ultra-high-pressure industrial pipelines (oil/gas, HDPE, composite).
Linear Pressure Ramping: Adjustable rates (0.1–10 Bar/sec) for precise failure point determination.
2. Industry-Leading Flow Rates
Modular Pump System: Deliver250 L/min @ 100 Baror720 L/min @ 150 Barvia interchangeable heads.
Variable Frequency Drive (VFD): Optimizes energy use during low-demand tests.
3. Dual-Mode Versatility
Burst + Hydrostatic Testing: Single machine for both short-term failure analysis and long-term creep resistance.
4. Safety-First Design
Explosion-Proof Enclosure: ATEX-certified for Zone 1 hazardous environments.
Dual Pressure Relief: Mechanical + electronic valves activate within 15ms during ruptures.
5. Intuitive Operation
15” Touchscreen HMI: Pre-loaded ASTM D1599 test sequences with customizable ramp profiles.
Wireless Handheld Controller: Remote operation up to 30m from test chamber.
Product Features
Linear Pressurization Technology:
Proprietary algorithm maintains ±0.5% FS pressure accuracy during ramping.
Auto-pause function at pre-defined thresholds for microstructure analysis.
High-Efficiency Pumping:
Triplex plunger design with ceramic-coated pistons for corrosion resistance.
Self-priming system with air bleed valve for rapid setup.
Data Acquisition:
1kHz sampling rate captures pressure spikes during failure events.
Edge computing module processes data in real-time (no external PC required).
Sample Compatibility:
Accommodates pipes up toØ1.600mm(63”) via optional expansion kits.
Quick-connect fittings for metric/imperial pipe threads.
Safety Systems:
Acoustic rupture detection (120dB alarm).
Emergency stop with E-Stop loop monitoring.
Technical Parameters
| Specification | Details |
|---|---|
| Pressure Range | 0–600 Bar (8,700 psi) |
| Flow Rate (Variable) | 250 L/min @ 100 Bar |
| Pump Configuration | Modular VFD-driven triplex plunger |
| Temperature Range | 5–60°C (ambient) |
| Power Supply | 400V/50Hz 3-phase (CE certified) |
| Chamber Dimensions | 2,200mm (L) × 1,200mm (W) × 1,500mm (H) |
| Weight | 1,200 kg (net) |
Send product request
Other supplier products
 |
ROSS zigzag tester | Product Introduction: The ROSS zigzag resistance tester installed the sole strip test piece on the ROSS zigzag test machine, so that the cut is di... |
 |
Testing Equipment for Wearing Stability of Safety Helmets | Testing Equipment for Wearing Stability of Safety Helmets - Other test instrument - standard Standards: GB 811 - 2022, GB 24429 - 2009, GB/T 28... |
 |
Mask Visual Field Tester | Application: Mask Visual Field Tester to determine whether field of vision under the mask meets the standard requirement or not. Standards: ... |
 |
Safety Helmets Impact and Penetration Resistance Tester | Standard GB/T 2811-2019(China’s national standard for helmet safety and impact resistance) GB/T 2812-2006/XXXX(Testing methods for impact a... |
 |
UV Viewing Cabinet | Scope of application: Coatings and paints: Used to test phosphors in various substances such as plastics, paints and coatings Aluminum foil: Used... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
