Large diameter blasting test machine

Standard

ASTM D1599: Compliant for short-time hydraulic failure testing of thermoplastic pipes under linear pressure ramp.

ISO 1167: Configurable for long-term hydrostatic pressure resistance testing (optional module).

Product Advantages

1. Unmatched Pressure Capacity

600 Bar Max. Operating Pressure: Tests ultra-high-pressure industrial pipelines (oil/gas, HDPE, composite).

Linear Pressure Ramping: Adjustable rates (0.1–10 Bar/sec) for precise failure point determination.

2. Industry-Leading Flow Rates

Modular Pump System: Deliver250 L/min @ 100 Baror720 L/min @ 150 Barvia interchangeable heads.

Variable Frequency Drive (VFD): Optimizes energy use during low-demand tests.

3. Dual-Mode Versatility

Burst + Hydrostatic Testing: Single machine for both short-term failure analysis and long-term creep resistance.

4. Safety-First Design

Explosion-Proof Enclosure: ATEX-certified for Zone 1 hazardous environments.

Dual Pressure Relief: Mechanical + electronic valves activate within 15ms during ruptures.

5. Intuitive Operation

15” Touchscreen HMI: Pre-loaded ASTM D1599 test sequences with customizable ramp profiles.

Wireless Handheld Controller: Remote operation up to 30m from test chamber.

Product Features

Linear Pressurization Technology:

Proprietary algorithm maintains ±0.5% FS pressure accuracy during ramping.

Auto-pause function at pre-defined thresholds for microstructure analysis.

High-Efficiency Pumping:

Triplex plunger design with ceramic-coated pistons for corrosion resistance.

Self-priming system with air bleed valve for rapid setup.

Data Acquisition:

1kHz sampling rate captures pressure spikes during failure events.

Edge computing module processes data in real-time (no external PC required).

Sample Compatibility:

Accommodates pipes up toØ1.600mm(63”) via optional expansion kits.

Quick-connect fittings for metric/imperial pipe threads.

Safety Systems:

Acoustic rupture detection (120dB alarm).

Emergency stop with E-Stop loop monitoring.

Technical Parameters

Specification	Details
Pressure Range	0–600 Bar (8,700 psi)
Flow Rate (Variable)	250 L/min @ 100 Bar
Pump Configuration	Modular VFD-driven triplex plunger
Temperature Range	5–60°C (ambient)
Power Supply	400V/50Hz 3-phase (CE certified)
Chamber Dimensions	2,200mm (L) × 1,200mm (W) × 1,500mm (H)
Weight	1,200 kg (net)

Другие товары поставщика

	UV Viewing Cabinet	Scope of application: Coatings and paints: Used to test phosphors in various substances such as plastics, paints and coatings Aluminum foil: Used...
	Safety Helmet Chin-strap Strength Tester/ Chin strap tensile tester / helmet chin strap tester	Standard GB/T 2812-2006: Safety Helmets GB/T 2811-2019: Head Protection – Vocabulary and Test Methods Equivalent Compliance: ISO/EN 397 ...
	Oxidizing liquid time pressure tester/	Product Description： Conforms to UN Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria 11.6.1 Test 1(c)(i): Time...
	Button Impact Machine	Testing Standards: ASTM D5171 Application:Button falling weight impact testeris used to determine the impact resistance of plastic sew-through fl...
	Auto - ignition Point Tester for Liquids	Standards: This product complies with GB/T 21860 - 2008 *Test Method for Auto - ignition Temperature of Liquid Chemicals* and ASTM E659 - 78(200...

Все товары поставщика

Похожие товары

	Air Permeability Tester STD- F8	Продавец: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Продавец: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Продавец: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Продавец: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Продавец: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...