Dry microbial penetration tester
Standards:
ISO 22612 YY/T 0506.5
Applications:
Dry microbial penetration resistance tester DMPRT is to assess the penetration resistance through barrier materials of bacteria-carrying particles.
Product Information:
Dry microbial penetration resistance tester DMPRT is to assess the penetration resistance through barrier materials of bacteria-carrying particles. The tester is applicable for medical clothing or relative materials. It is the recommended testing instrument for determine the protective performance against dry infectious agents during the using processing of the textile or clothes above.
Dry microbial penetration testerStandards:
ISO 22612 YY/T 0506.5
Dry microbial penetration testerFeature:
Color touch screen for preset parameter and display.
Negative pressure testing condition is safer.
Built-in illumination system is convenient for observation during the test.
Stainless steel chamber with double layers is heat and fire resistant.
Dry microbial penetration testerMain parameters:
Vibration form: pneumatic ball vibrator
Vibration frequency: 20800 times / min
Vibration force: 650N
Worktable size: 40cm × 40cm × 10mm
Workbench media: marble plate
Experimental container: stainless steel test container
Work stations: 6
Cabinet negative pressure range: -50 Pa ~ -200 Pa
High efficiency filter filtration efficiency: better than 99.99%
Negative pressure cabinet ventilation flow: ≥ 5m3 / min
Data storage capacity: 100,000 group
Working voltage: 220V 50HZ
Send product request
Other supplier products
 |
10kN Universal Testing Machine | Standards: 1. Manufactured according to GB / T2611 "General Technical Conditions for Testing Machines" and GB / T 16491-2008 "Electronic Univers... |
 |
Wascator FOM 71 CLS Lab Washer - Extractor ISO 5077/6330 | Standards: ISO 5077/6330. M&S P1/P1A/P3A/P12/P91/P99/P99A/P13. BS EN25077/26330. NEXT TM7/7A/7B/TM12. GB/T 8629. IWSTM 31. IEC 456 Applicatio... |
 |
Rubber Resilience Tester | Introduction: A Rubber Resilience Tester is a specialized instrument used to measure the resilience (or rebound elasticity) of rubber and rubber-l... |
 |
Fabric Friction Charging Charge Tester | Standards: JIS L-1094; JIS T-8118; ZB W 04008-89; GB / T12703.2-2009; GB 12014-2009; GB / T23316-2009 Applications: Fabric Friction Chargi... |
 |
Helmet Anti - detachment Testing Machine | Purpose Apply an initial load of a certain force to the rear of the helmet. Then, let a weight specified by the standard fall from a certain heigh... |
Same products
 |
Falling Sand Abrasion Test machine | Seller: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | Seller: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | Seller: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
 |
High temperature vacum friction & wear tester | Seller: Standard International Group (HK) Limited | The working principle of a high-temperature vacuum friction and wear testing machine is to simula... |
