Product Description
Disc filtersare a cross between ascreen filterand a media filter, with many of the advantages of both.
Disc filters are good at removing both particulates, like sand, and organic matter. A disc filter consists of a stack of round disks. The face of each disk is covered with various sized small bumps.
A close up view of the bumps reveals that each has a sharp point on the top of it, somewhat like a tiny pyramid. Because of the bumps, the discs have tiny spaces between them when stacked together.
The water is forced between the disks, and the particulates are filtered out because they won’t fit through these gaps. The organics are snagged by the sharp points on the bumps.
For automatic cleaning of the filter the disks are separated from each other which frees the debris to be flushed out through a flush outlet. For less expensive disk filters you must remove the disks and hose them off.
Features:
-
Made of polypropylene material which has Excellent chemical and weather resistanceand durable.
-
Operation is easy and requires no special tools
-
Long-term operation with little maintenance or cleaning
-
Maximum operating pressure 10 kg/cm² (142 psi).
-
Available in standard filtration 120 mesh. (Other mesh sizes are available On demand).
-
Available in 1 1/2″-4″, BSPT & NPT male threaded inlet & outlet.
Application:
-
Used for water filtration of drip & landscape irrigation system.
-
Suitable to use where precision filtration is required like reclaimed water application.
