Wear-resistant ceramic products titanium carbide powder
Titanium carbide powder has excellent chemical stability. It is insoluble in common acids and bases such as water, hydrochloric acid and sulfuric acid, and only corrodes slowly in hydrofluoric acid and hot concentrated sulfuric acid. It is suitable as a raw material for making corrosion-resistant coatings. By spraying it onto the metal surface through the thermal spraying process, a wear-resistant coating with a thickness of 50-200μm can be formed, which can extend the service life of the parts by 5-10 times. The oxygen content of the powder is less than 0.1%, which can reduce the oxidation reaction during the sintering process and ensure the mechanical properties of the product. In oil drilling equipment, the coated drill bits prepared with this powder can withstand the high temperature, high pressure and corrosive environment underground. The powder has low toxicity and complies with environmental protection standards such as RoHS, making it suitable for use in fields with high safety requirements such as medical devices and the food industry. It has good compatibility with biological tissues. The bone repair materials made from it can promote the growth of bone cells and accelerate wound healing. The powder has good storage stability. When stored in a sealed container, its shelf life can reach more than 5 years without caking or deteriorating. In the field of dentistry, it can be used to make dental implants, which are both wear-resistant and aesthetically pleasing, with a service life of over 10 years.
Send product request
Other supplier products
 |
Factory direct supply high hardness steel rolling special carbide guide wheel & roller | Guide wheels, also known as guide rolls or guide wheels, are an important part of bar and wire rod rolling equipment in the iron and steel indust... |
 |
High-temperature and wear-resistant industrial titanium carbide rods | Titanium carbide round rods made of hard alloy have excellent electrical conductivity and can be used to make electrodes for electrical discharge m... |
 |
Titanium carbide hard alloy guide wheel manufacturer | The titanium carbide hard alloy guide wheel exhibits exceptional thermal shock resistance, maintaining structural integrity even under rapid temper... |
 |
Customized chromium carbide powder | 碳化铬粉末可与其他耐磨材料粉末（如碳化钨、二硫化钼等）混合，形成复合涂层，兼具高耐磨性和自润滑性，摩擦系数低至0.05，适用于无润滑或难润滑工况。在造纸机械烘缸表面，该复合涂层可减少纸张摩擦损伤，防止粘纸，提高生产效率。粉末粒径均匀，粒度分布偏差小于10%，确保涂层微观结构一致，避免性能缺... |
 |
Vacuum sintering process guide wheel | Titanium Carbide Guide Wheel is a special industrial component made of Titanium Carbide (TiC), which has a silvery metallic appearance and a smooth... |
