Wear-resistant ceramic products titanium carbide powder
Titanium carbide powder has excellent chemical stability. It is insoluble in common acids and bases such as water, hydrochloric acid and sulfuric acid, and only corrodes slowly in hydrofluoric acid and hot concentrated sulfuric acid. It is suitable as a raw material for making corrosion-resistant coatings. By spraying it onto the metal surface through the thermal spraying process, a wear-resistant coating with a thickness of 50-200μm can be formed, which can extend the service life of the parts by 5-10 times. The oxygen content of the powder is less than 0.1%, which can reduce the oxidation reaction during the sintering process and ensure the mechanical properties of the product. In oil drilling equipment, the coated drill bits prepared with this powder can withstand the high temperature, high pressure and corrosive environment underground. The powder has low toxicity and complies with environmental protection standards such as RoHS, making it suitable for use in fields with high safety requirements such as medical devices and the food industry. It has good compatibility with biological tissues. The bone repair materials made from it can promote the growth of bone cells and accelerate wound healing. The powder has good storage stability. When stored in a sealed container, its shelf life can reach more than 5 years without caking or deteriorating. In the field of dentistry, it can be used to make dental implants, which are both wear-resistant and aesthetically pleasing, with a service life of over 10 years.
在线联系供应商
Other supplier products
 |
Titanium carbide hard alloy guide wheel with strong load-bearing capacity | The installation holes of the guide wheel have high precision, and the fit clearance with the shaft can be controlled within 0.005-0.01mm, ensuring... |
 |
Special for titanium carbide hard guide wheel transmission | The surface of the guide wheel can be specially treated as required. For instance, after being sprayed with a diamond coating, its wear resistance ... |
 |
Wear-resistant titanium carbide rod bearing parts are applicable | Titanium carbide round rods made of hard alloy have excellent electrical conductivity and can be used to make electrodes for electrical discharge m... |
 |
High-performance titanium carbide powder | After the surface of the powder is modified, it can be well combined with organic materials such as resin and plastic to form metal-ceramic composi... |
 |
Customized chromium carbide powder | 碳化铬粉末可与其他耐磨材料粉末（如碳化钨、二硫化钼等）混合，形成复合涂层，兼具高耐磨性和自润滑性，摩擦系数低至0.05，适用于无润滑或难润滑工况。在造纸机械烘缸表面，该复合涂层可减少纸张摩擦损伤，防止粘纸，提高生产效率。粉末粒径均匀，粒度分布偏差小于10%，确保涂层微观结构一致，避免性能缺... |
