Optical parts processing titanium carbide hard alloy round rods
As a critical material in the field of high-end manufacturing, cemented carbide titanium carbide round rods exhibit excellent corrosion resistance and are highly resistant to rust and degradation in humid, acidic, or alkaline environments. These rods possess a thermal conductivity that is 15% higher than that of conventional tungsten carbide round rods, enabling more efficient dissipation of heat generated during cutting operations and thereby reducing the risk of tool wear caused by overheating. With a bending strength of up to 2500 MPa, the material combines high hardness with a degree of toughness, effectively preventing breakage due to impact during use.
In the aerospace industry, precision machining tools fabricated from these rods are commonly employed in the production of engine components, meeting the stringent requirements of high-precision manufacturing. Cemented carbide titanium carbide round rods are high-performance materials produced through powder metallurgy techniques, with titanium carbide serving as the primary hard phase and cobalt or nickel acting as the binder phase. The hardness of this material exceeds HRC85, and its wear resistance significantly surpasses that of conventional steel. Notably, it maintains stable mechanical properties even under high-temperature conditions exceeding 500°C.
These round rods also demonstrate exceptional dimensional accuracy, with diameter tolerances controlled within ±0.01 mm and surface roughness as low as Ra 0.02 μm. They are ideally suited for the manufacture of precision cutting tools and mold cores. When used to machine difficult-to-cut materials such as stainless steel and titanium alloys, tools made from this material exhibit a service life 10 to 20 times longer than that of high-speed steel tools, thereby substantially improving production efficiency.
Other supplier products
|
|
Ultrafine titanium carbide micro-powder |
This powder has excellent electrical and thermal conductivity, with an electrical conductivity of 3×10⁴S/m and a thermal conductivity of 35W/(m·K),... |
|
|
Micron-sized titanium carbide TiC powder - uniform particle size |
Titanium carbide powder can be mixed with other carbide powders (such as tungsten carbide and vanadium carbide) to form multi-component composite p... |
|
|
Metal composite titanium carbide powder |
After the surface of the powder is modified, it can be well combined with organic materials such as resin and plastic to form metal-ceramic composi... |
|
|
Dense and strong titanium carbide powder |
Titanium carbide powder has excellent chemical stability, insoluble in water, hydrochloric acid, sulphuric acid and other common acids and alkalis,... |
|
|
Round bar for extrusion mold |
Titanium alloy round bar is an alloy material composed of titanium and other elements, which has the properties of light weight, high strength, h... |
All supplier products
Same products
