Rrepair strip with CN bonding layer need to be roughened when is it be bonded to conveyor belt ?
Rrepair strip with CN bonding layer need to be roughened when is it be bonded to conveyor belt ?
If we don't roughten repair strip , could it be bonded to the damage of conveyor belt?
Almost all people who use repair strip at the first time have this consideration.
To answer this problem , we need to know the function of CN bonding layer firstly.
Image 1, Ramimtech CN bonding layer repair strip .
Ramimtech repair strip with CN bonding layer, such as the image showed, take off protection film,the blue layer is
CN bonding layer , it will be bonded to the damage of conveyor belt. Brush one coat cold vulcanizing adhesive SK811 on it ,
vulcanizing reaction will generate between Cn bonding layer and conveyor belt damage area, they will be bonded together,
and bonding strength will be improved.
Image2,Ramimtech conveyor beltrepair strip with Cn bonding layer and cold vulcanizing adhesive SK811,
After knowing the function of Cn bonding layer , we get that repair stirp with Cn bonding layer need not to be roughened.
The way of which bonding repair strip (with Cn bonding layer) together with cold vulcanizing adhesive is not only easy to
operate,but also time saving . Conveyor belt can be back to run after repair. Cut downtime greatly.
When use repair strip with CN bonding layer , we only need brush one coat cold vulcanizing adhesive on the CN bonding layer .
and brush two coats on roughened damage area. when the adhesive is slight sticky, bonding them together .
As for traditional repair, though it can bond damage area, repair strip need to be brushed two coats,which will cost long time till the adhesive is sticky and can be bonded.
and the repaired area have large probability to be peeled off or be scratched by scraper.
so we get that repair strip with Cn bonding layer will enhance the bonding strength and it is time saving. and with special fabric reinfoced layer , it will increase wearing coefficient and to prevent repaired area from the secondary damage.
Send product request
Other supplier products
 |
dipute uncured intermediate rubber | Dipute uncured intermediate rubber is special for conveyor belt hot vulcanizing jointing , can be used for steel cord conveyor belt, canvas, nylon,... |
 |
Conveyor belt repair materials | Conveyor belt repair materials When mentioned about conveyor belt, many of us will think about the movement of materials, ore, coal and so on, whic... |
 |
Belt repair glue SK811 | Belt repair glue SK811 When conveyor belt running for a long time, whose surface will be partly damaged, however, we should not regardless this dam... |
 |
RAMIMTECH wear-resisting rubber sheet | RAMIMTECH wear-resisting rubber sheet RAMIMTECH wear-resisting rubber sheet is used for lagging for conveyor belt drive drum , vibrator feeder, chu... |
 |
Dipute drum lagging diamond rubber sheet | Image isDipute drum lagging diamond rubber sheet Diputedrum lagging diamond rubber sheet is a new generation of wear-resistant rubber sheet which i... |
Same products
 |
Aluminum Extrusion 6063 scrap | Seller: Willies De Scrap Inc | Are you looking for aluminum extrusion 6063 or any other type of scraps and then you are welcome ... |
 |
RUBBER ROLLER | Seller: THAKORJI TECHNOMECH | Rubber Roller Silicon Roller PU Rubber Roller Aluminium Roller- |
 |
RUBBER ROLLER | Seller: THAKORJI TECHNOMECH | |
 |
RUBBER ROLLER | Seller: THAKORJI TECHNOMECH | |
 |
" EP/NN/CC high tensile strength Conveyor Belt with heavy load capacity and good elasticity" | Seller: Haichuan Belting Co.,Ltd | .It uses ployester canvas as carcass, and its structure is the same as that of General-used Conve... |
